Alfa Romeo Forum banner
hose
1-20 of 208 Results
Advanced
  1. Alfa GTV & 916 Spider
    Hi, I'm about to take my front hub and calliper off the car for a quick de-rust and tidy up. So it's a PH3 2.0TS What thread are the ends of flexible hoses that enter the calliper? So I can buy the correct blanking plug..... Thanks in advance!
  2. Alfa 147, 156 & GT
    Hello, i have Alfa Romeo 147 1.6ts 105ps, and i have a worn hose that i want to replace but i dont know the spec for the hose, hose is going from throttle body under the engine cover i will attach the picture also&(hose with yellow tape on it), some quick help would be great.
  3. Alfa 147, 156 & GT
    Has anyone replaced these? I have a leak in one and will try to replace both. It looks like an absolute pig of a job on the V6 engine. You can hardly see the hose clamps on the heater core pipes at the firewall let alone get a tool on them. Maybe it's easier to pull out the heater core from...
  4. Alfa 147, 156 & GT
    Anyone have any idea of a part number for this hose. It is on my daughter in law's 147 twin spark selespeed. Her mechanic has described as hose from pump to gearbox. I haven't seen this in person as she sent me a pic. I am guessing it is from the selespeed pump to gearbox?
  5. Alfa 147, 156 & GT
    Hi all, The fuel hose from the fuel filter to the engine has split on my GT and has resulted in diesel being squirted all over the filter and down on the exhaust (which was kind of a smoky experience). It seems to have worn through the braiding and the hose itself by rubbing on the fuel filter...
  6. Alfa GTV & 916 Spider
    Hi All, I've got a leaky roof hose and need to replace it. Is there a diagram that shows exactly where each individual hose connects to the motor..? Seems all the hoses are taped together and I want to disconnect the correct one when I swap it out. Then finally my roof will work again..yay! Cheers
  7. Alfa 164 & 166
    hi anyone know how to loosen these strange clips, or should i cut them off and replace with standard jubilee clips, i'm trying to change the coolant.
  8. The Classic Alfa Romeos
    Just in the process of changing my suspension and have found my brake hoses to be dangerously damaged. I've got some good ridge braided hoses from CA and have fitted the front two with out too many problems. I've just crawled under the car to do the rear one and found that it is attached...
  9. Alfa Giulietta
    Hi Guys, As my forum search was in vain, can anyone help with the proper tool (plier to purchase) to remove the clamps on hoses. I want to replace my spark plugs but to do so have to disconnect hose from the top cover. I have a 1.4 TB engine [not multiair]. Thanks for assistance.
  10. Alfa 145 & 146
    Hi! Trying to sort one problem, got another worst than the first one, I think. After changing fuel pumps, I now get a fuel leak from the white hose connector. All looks good in one place and fitting tight, but with engine working a lot of fuel comes out from that spot. Spare part is a hose with...
  11. Alfa 147, 156 & GT
    Whilst one of our Sportwagons happily sailed through yet another mot test, I was slightly concerned and embarrassed that she peeed coolant all over the testers four post lift. Turned out to be the hoses from the thermostat to the heater matrix were a shadow of their former selves. No one seemed...
  12. Alfa GTA
    I have my MOT coming up and upon checking the front brake hose on my 156 GTA, there are signs of the rubber cracking on the bends. Wasn’t flagged up as an advisory last year, so wanted to know if it’s an MOT failure with the new updated MOT regulations.?. I also noticed that the...
  13. Alfa 147, 156 & GT
    I have my MOT coming up and upon checking the front brake hose on my 156 GTA, there are signs of the rubber cracking on the bends. Wasn’t flagged up as an advisory last year, so wanted to know if it’s an MOT failure with the new updated MOT regulations.?. I also noticed that the...
  14. Alfa 147, 156 & GT
    Hi guys! My 2005 GT JTD's lower turbo hose has split, so I'll be replacing it over the weekend and while I'm under the car I'll be also replacing the intake pipe (MAF to Turbo) so my question is what size of clips I should buy? As far as I know the lower turbo hose is 65mm at the intercooler...
  15. Alfa GTV & 916 Spider
    Having just bought a Spider 916 and fixed all the easy issues, I'm now at the roof stage. Does anyone know the numbering sequence of the hydraulic hoses that come out of the pump? CRH in the UK sell by the the letter of the hose but unfortunately all my letters have dissappeared in a wash of...
  16. Alfa 147, 156 & GT
    Evening all. As the GTA has sprung a small coolant leak I need to buy the section of hose which goes from the coolant expansion tank to the metal pipe which runs behind the inlet manifold (V6), I have 20mm in my head but is that the correct size? Thanks in advance :thumbs:
  17. Alfa Giulietta
    Hi, Please could someone let me know where the rear washer hose is located in the engine bay? I know it branches off from the front washer hose, but I can't find where! I think my rear hose has become detached as the rear washer doesn't work. I can hear the motor working, and the rear wiper...
  18. Alfa GTV & 916 Spider
    Hi Folks, So my spider has a major roof fluid leak.. when you operate the roof it dumps most of the fluid out in front of the roof motor just under the 2 rams, then it drips out onto the road under the car. So I thought it might be these 2 rams next to the roof motor.. I've changed both of...
  19. Alfa 159, Brera & Spider
    Hi everyone, My 159 2.4 JTDM had been smelling pretty strongly of diesel the last week and finally started throwing up warnings (P0202 2nd injector issue), checked under the hood and the hose above the injectors appears to be leaking. Video of the issue: Any idea what this part is actually...
  20. Alfa 147, 156 & GT
    Hi Does anyone have an aftermarket part number for the lower pipe on the expansion tank of the 2003 156 SW Selespeed 2.0 JTS ? Thanks
1-20 of 208 Results
Top