Alfa Romeo Forum banner

holes

  1. 19" dark 5 holes vs replicas? how to tell?

    Alfa Giulia
    Hi all I have some of the 19" dark 5 hole wheels on the way. Those of you who have bought them, what markings etc are there on the back to confirm they are genuine alfa wheels, rather than replicas? Ive seen a few photos on here, some with ALFA ROMEO, and someone else saying theirs didnt look...
  2. Pot holes!!

    General Motoring Discussion
    Read this in the news this morning - Anyone on here? From all the cars on the road, to pick on a Brera I thought was quite rare!
  3. Aluminium Tape Covering Bodywork Holes

    Alfa 147, 156 & GT
    I was doing some rust treatment recently and came across aluminium tape covering openings in the bodywork. These are the manufactured circular holes into box sections etc, not rust holes. There seemed to be a couple around the rear suspension, maybe others but didn't look any further than the...
  4. Wheel bolt holes

    Car Detailing
    Hi All Im normally full of ideas but for my problem if brains were domino's i would be a double blank ! :biglaugh: My alloys are a multi car fit with 10 bolts holes ( i didnt buy them ) and i want to cover / fill the 5 that are not used. They are nice wheels but the extra holes spoil them...
  5. 7 holes Genuine Brera alloys 18x8J ET41 - For Sale

    Alfa 159, Brera & 946 Spider
    Hi folks, have a set of four original alfa wheels in very good condition. 18inch 8J PCD 5x110 ET41 Location: Sofia / Bulgaria New Price: 270GBP Shipping to UK: 80GBP (4-5 business days) [email protected] +359 883 361616
  6. template to drill holes for wind deflector

    Alfa GTV & 916 Spider
    Just scored a wind deflector for my spider of flea bay Like most things off flea bay its not quite complete does anybody have a copy of the drilling template for the mounting holes? and the angled mounting spacers does anybody have a spare set or the dimensions, have a lathe and milling...
  7. leather care - seats with holes

    Car Detailing
    Hi All Am I correct in saying best to use leather wipes or a spray to avoid the tiny pinholes in leather seats from getting clogged? Used one of the Meguairs Gold Class Leather products and although the result was great found some areas of pinholes blocked with residual cream. Thanks
  8. Ram pipes fitted but what about the pipes and holes left over?

    The Classic Alfa Romeos
    Thought I'd try some ram pipes on the Spider. I've replaced the cylinder air cleaner but I need some help with the left overs. The top hose from the camshaft cover I know will need to go to an oil catch tank but what about the large plastic hose on the right that went from the cleaner to the...
  9. GTV seat belt weird holes

    Alfa GTV & 916 Spider
    Hello! I have 2 holes on each side of my gtv phase 1. It is not a spider. The holes are on the plastic cover under where the seat belt is fixed, at the door. On the left side there is a small plastic line on it so the holes are not visible. What are they for? :D
  10. Oil in Plug Holes

    Alfa MiTo
    My 135 MA went in for new seals in the cam cover way back at 18000 miles because the dealer spotted oil in one of the plug holes. I continued to get oil in the plug holes since, so, their fix wasn't much cop unless they just replaced the seal in the plug hole that doesn't get oil it it. I...
  11. Set of mat holes anyone?

    Alfa 159, Brera & 946 Spider
    Sorting out some junk and have found a set of large hole plastic mat fixings. Just the mat parts, not the studs. Anyone need a set? (I replaced them on a set of mats with the smaller press stud type.)
  12. DPF bypass pipe with no holes for sensors

    Alfa 159, Brera & 946 Spider
    Hello all, Spent quite a lot of time trawling through old threads about DPF removal, but haven't been able to find a specific answer to my query. I have a 159 Ti 1.9 JTDM. I bought a DPF bypass pipe, which once arrived I discovered had no hole for the temp sensor or pipe for the pressure...
  13. DPF drilling - how big can you go on the holes?

    Alfa 159, Brera & 946 Spider
    Hi all, I have a 159 2.4 JTdM, which i love, but....no too keen on the DPF (nothing new there then). Drilling the DPF sounds a good plan, but does anyone know how much of the end you can remove, without the light coming on? I.E - can a drill 5 30mm holes 10mm deep, with out issue - or can...
  14. drainage channels or holes for a GTV ??

    Alfa GTV & 916 Spider
    Hi all Wondering if there is a diagram or info I can look for with regards the drainage channels for an Alfa GTV ?? I ask as I get a little drip after I wash the car ... seems to be only on the passenger side footwell .. kind of under the dash? I do have an aftermarket sunroof but that...
  15. HELP? 147 jtd 8v small vacuum holes renew

    Alfa 147, 156 & GT
    Hi I have searched the forum and cant find help so heres the question. I am changing my small vacuum hoses, due to the pressure converter valve been damaged. I wished I would of taken a photo of where they went, as like an idiot I have mixed them up, does anybody have a photo, or drawing of how...
  16. Bodywork question 159 bumper sensor holes

    Alfa 159, Brera & 946 Spider
    Hi I have a 159 lusso with parking sensors fitted as standard. My bumper has a few cracks , scuffs n scratches and i have seen one advertised in a breakers that looks in good condition for £100 which is same colour - my idea ... is to replace rather than get mine resprayed and repaired. I...
  17. Holes on top of windscreen 'rail'

    Alfa GTV & 916 Spider
    :confused: A question that I have been meaning to ask ever since I bought my Spider nearly a year ago: On the top of the windscreen frame,(the rail as I am calling it),on either side are 2 holes - the bottom one is where the hood levers hook into when you have raised the roof. Anyone know what...
  18. Best way to repair small rust holes

    The Classic Alfa Romeos
    Hi, there's plenty of big holes to keep me busy which im cutting out and welding in patches but there's also quite a few areas where it has only just rusted through and tidying them up means its only about a 10p sized hole back to good metal. My book recommends fibre glass but is this frowned...
  19. The Poor broke my back windscreen 147Q2 with rear spoiler - Replacement part number?

    Alfa 147, 156 & GT
    Guys, I had my back windscreen smashed last week. Also the two door handles!! Any they didn't even steel anything!!! ARRRRHH! Have been waiting for over a week for the new glass to arrive with Mr Windscreen in Athlone, Midlands, Ireland. Went down to Mr Windscreen today to be handed a...
  20. Alfa 156 Holes

    Alfa 147, 156 & GT
    Hi all I was having a look under my car and I noticed what looked like undersell pealing off. When I removed it it was more like tape and underneath it there was a hole. It was not caused by corrosion as it was perfectly round like it was factory formed. Any ideas if this is normal. It was on...
Top