Just had my 57 plate Spider serviced and the airflow warning light (orange tap icon) and the 'get engine checked' warning notice coming on and off. Is this the air flow sensors or the possible stretched timing chain? Clearly, I'm very worried if it is the latter :cry: The car just slightly...
I have a 3.0 V6 Veloce which I think has a faulty AFM. I`ve priced a new one up at close to £600, or can have the faulty one rebuild for £195 plus VAT. However, I have found one for sale from the same car, but with a slightly different part number.
Does anyone know if the AFM for this car...
I have to change my MAF (4 pin model) but I'm not sure which one is the right one for my car. The BOSCH 0 281 002 980 or BOSCH 0 281 002 792? My chassis number is ZAR93700005249563, code motor number 937A5000, Alfa Rome GT 02/2007.
Thanks so much
I have been reading lots of information about my engine, and i am a litle confused.
My engine is the first JTD 8v engine, 105HP
i read that there are three injectors, cf1(in my car) cf2 on 110cv and cf3 on 115 but i dont know if there is a diference in flow between them?
Can anyone confirm which way the air flow arrow should be facing in the G? It's a job and a half fitting these things and I'm not convinced I fitted the last filter the right way round, I was just glad to get it in!
So should the arrow be facing towards the engine or towards the driver?
got in the car at work tonight and being freezing put the heater on
trying to warm my hands i put it on the vents position (dual zone climate middle button)
i noticed not much flow coming out at all even on the fastest speed
turning it to low it blew perfect but not when on hot?
Just want to check a couple of things if some one knows please
1.flow direction through the oil cooler sandwich im assuming it flows from the top anf through the sandwich and into the block.
2. and is the flow controlled by the thermostat so no flow when cold
P0100 Mass or Air Flow Circuit malfunction and P0564 Cruise Control Multi Function Input 'A' Circuit .
any one know whats causing these codes?
i have VDC , ASR AND HILL HOLDER LIGHTS UP . AND CHECK ENGINE , AND THE FUEL GAUGE HAS DROPPED TO ZERO.
have already changed the clutch and the...
hi all just fitting car back up but hit a problem with the air flow mass metre, the twin relays are working and click open when you open flap manually, the problem i got is when i had the engine fire alot of water got inside the metre because the covern was not on, does that mean it has had it...
This is the first time that i write here. I am an owner of Alfa Romeo 159 2007.
Glad to find so much knowledge here :thumbs:
This morning, just turned the blower of the air con directed to the windshield, but the air flow direction wouldn't change. I tried to direct it to my feet...
I've had a search to try and avoid duplicating previous threads but I couldn't see anything.
I've got a 2.2 Brera (08) with what I think is a broken air flow meter, well thats the conclusion I've reached from advice previously posted on here and the AA guy. I'm currently separated from the car...
Lads can we get together here and bang out idea's? This 166 is like a little puppy that's being bold for me now. Got the drains sorted during the week a few days later the engine management light came on but no issue with engine performance that I could tell, got home and plugged in the OBD2...
On my 2.4, how does the airflow meter take into account the air which is bypassed around the MAF via the resonator, same question applies regarding the egr as the introduces (exhaust) gas to the inlet after the MAF?
This might also be the case for other cars too.
Hello my fellow forum bashers!
Would anyone be able to confirm the direction of the coolant flow thro the egr? I have already deleted the whole egr system, and am currently looping the feed/ return pipes, but have a preheater to add into the system - rather than blanking these off and fitting a...
It looks very similar to the standard oval exit. Great sound on a TS, will fit a V6 with a 2 bolt flange.
price is £180 collected. There is an exhaust place behind my work shop if you wanted to drive down and have it fitted to your car at an additional cost.
Located in Me10 3DY