Alfa Romeo Forum banner
flange
1-15 of 15 Results
  1. Alfa 147, 156 & GT
    On my 156 V6 2.5 the exhaust flange on the catalyst is quite corroded. The catalyst itself is still good so I won't replace it but would like to repair the exhaust which from the catalyst and backwards is made of stainless steel and has now lasted for 17 years. Do anyone know a place in Europe...
  2. The Classic Alfa Romeos
    Hi I am rebuilding my GTV 2.0 gearbox at the moment and I have just received the intermediate flange bearings from EB spares UK. What I would like to know if changing these 2 bearings will affect the height between the pinion and intermediate flange needing to change the shim ? I didn't...
  3. Alfa 33, Sud & Sprint
    Evening all, I have come across a bit of an odd situation. I am in the process of changing the front left wheel bearing, as the bearing has been kackered for so long ...previous owner....its chewed out the hub flange, I have received a new flange from a supplier however it's not the same, the...
  4. Alfa 147, 156 & GT
    Does anyone know where I can purchase an exhaust flange, prefer mild steel but stainless is fine, 12mm or more, JTD 1.9 16v? I am getting my brother to build a custom exhaust manifold and it will save some hassles if I can get one already cut. Shipping is to Australia... Thanks!
  5. The Classic Alfa Romeos
    Hi Is this nut left hand thread ie. clockwise to loosen? Thanks
  6. Alfa 147, 156 & GT
    Hi, came to change my brake disks and TWO of the wheels nuts sheared off they had seized up so badly. Today removed brake disks to reveal two stubs from the stubborn wheel nuts. Tried everything to remove them but they just bent and distorted/rounded off. So, Plan B, remove centre 36mm nut and...
  7. Alfa GTV & 916 Spider
    I have bought a CF3 V6 cat for my car but it is one with a 2 bolt flange at the back. My original was a 3 bolt flange. I presume this is from a later model as mine is a 2001 which I believe is one of the early CF3?? The problem I now have is that the 3 bolt flange in the back box won't fit the...
  8. Alfa GTV & 916 Spider
    I tried changing my passenger side drive shaft oil seal earlier today but got stumped when trying to get the diff. flange and shaft out. The manual calls for a couple of Alfa tools. One of them looks like a little slide hammer. Anyone have any experience of this? Cheers G
  9. Alfa 147, 156 & GT
    Afternoon, Can anyone confirm if you can weld an exhaust manifold? Mine appears to be leaking right where the tube meets the flange, near the heat shield mount. Alternatively what are my options? Any tubular manifolds without the two cats available? Gareth
  10. Alfa 145 & 146
    Hi, I am looking for a drawing of the twiny exhaust header flange, so I can make a sport/race version of it :cool: Maybe will do a group buy when I make it :thumbs: thnx all
  11. Tuning & Upgrades
    Hi all, Dunno if anyone can help with this one? a good mate of mine is trying to do me a downpipe decat for my 2005 156 2.4 JTD mjet but has come unstuck in sourcing a V band flange for the turbo end. The rest of it is ready to go - jigged, pipes bent, 3 bolt flange cut etc. Is there anywhere...
  12. Alfa 147, 156 & GT
    Hi all I have an **** of a problem. Left front wheel, one of my wheel bolts does not tighten properly. it does screw in but then just spins. I have hoped it just needs re-tapping but my mechanic assures me it needs new parts as once the thread's gone I'm screwed (pardon the pun). I want to...
  13. Alfa 145 & 146
    Hello! I dont have any of my exhaust system off the car at the moment, its a bit cold out lol I require the dimensions for the exhaust flange, last on the down pipe, just before the cat on the >97 onwards (slip on CAT type) on the 145's. Im sure the 155, 156 etc will be the same. Does anybody...
  14. Engines (TS, JTS, JTD & V6)
    Hello! I dont have any of my exhaust system off the car at the moment, its a bit cold out lol I require the dimensions for the exhaust flange, last on the down pipe, just before the cat on the >97 onwards (slip on CAT type) on the 145's. Im sure the 155, 156 etc will be the same. Does anybody...
  15. Tuning & Upgrades
    Does anyone has the dimensions of the exhaust pipe connecting flange on the turbine? It is for a 2002 147 1.9 JTD 8v, turbonr. 712766-1. It is the so called v-band connection and I'm interested in the largest diameter of the turbine flange. Out going side, where the downpipe connects! Thanks!
1-15 of 15 Results
Top