fitting

OK, I know its marmite thing but I have a very unique (dare I say rare) original zender (alfa part number accessory) 2nd 'stradling' spoiler. It wraps around the rear window and fits to the c pillars. Also it has bit in the centre that rests on the window. When offered up it naturally falls...

Hi There, I have just purchased a 2001 Spider V6 3.0. I would like to fit a wind deflector and roll over bars for it but there are so many versions. Does anyone have a link to a version that will just "bolt on"? There is a plate on each side of the back tray with two cap screws underneath, is...

Hi Am thinking of fitting momo wheel and boss kit but i understand you need to apply resistors to airbags to turn off airbag light.. Does anyone know how and where they are located. Many thanks

Good afternoon, I've been looking to fit a DV+ diverter valve to my Cloverleaf, but it's the early model. I've got the correct part for the later Mito - but it doesn't fit the early Mito models as the inner interface on the OEM diverter valve is slightly different. My question is - does anyone...

Hi I am thinking of removing original cat and have custom decat pipe to replace..i then want to place a sport cat in exhaust centre pipe further downstream...was wondering if stainless ebay job is gonna be okay or what makes are trustworthy...i dont wanna pay ragazoon prices...i already have...

Hi all, Disclaimer!! @cue2 I understand the risks of posting this. I prefer to match the symmetry of The rear of car and not the asymmetry of the front. Also I prefer to match the instrument display. @All, I am sure I have read just about all threads on this topic over the years and can’t...

Hi, I've just bought a 147 JTDM (non Bose system) and have fitted my old Sony DAB/Mp3 (CDX-DAB6650) player, the adaptor works fine but for some reason my Sony DAB wont work with the ignition switch off even tho there is power to the unit from the multiblock connector, every time I turn my 147...

In the absence of later version of brake compensators, I'm considering retro fitting an early spring load brake compensator. I need information with regards to the spring and where it attaches to. I've looked at the GTV manual and the diagram shows the spring going straight into the subframe, is...

I want to take out the standard aerial mechanism - not working correctly - from my 916 GTV and fit a replacement stock aerial mechanism which I have sourced. I have looked at the Tech info guides stickies but do not see any “how to guide” on this subject. Can anyone give me a link to any...

I've read that you can't fit roof rails to a sportswagon which didn't have them from the factory due to body strength issues. I'm currently stripping a sportswagon which has roof rails and can see all the internal structure but i can't see any added strength which i suspect wouldn't be there on...

Hi,I have received a new Eiebach rear bar for my V6 GT and it was at my mechanics to get fitted yesterday but he rang me to say he couldn’t fit it for a couple of reasons.He is not an Alfa specialist and there isnt one to seek advice from where i live so I am seeking some help. 1.The Eibach bars...

Can anyone help me with where and how to put this kit together from Connects2 to good use.Here is the kit ...Connects2 CT23AR03 There are four plates and four screws that need to marry up to the cage supplied . Has anyone fitted this please. Two plates are rectangular copper and they seem to...

I have Googled this .....but come up empty. Could someone please give me some pointers on fitting Wizard headers to a P3 3.2 GTV. Is it most definitely an engine out job.. or is it possible to drop the subframe a bit and tilt the engine? I don’t want to mess the job up but...

Hi - I have a 2006 Brera Q4 and I'm going to replace the factory fit stereo with a new head unit. I understand that the double DIN fascia is actually just a single DIN unit at the back (upper half) with the Blue&Me (?) unit occupying the lower half. I also understand that I need to keep that...

So the big square one blocks the EGR shaped hole on the inlet manifold therefore allowing the engine to only draw in fresh air. The second one. Do you fit this on the exhaust manifold where the EGR gasses start their journey or where the EGR gasses enter the EGR valve? I'm guessing it goes on...

Hi iv my engine out and had to remove the slave cylinder to get the gearbox away from the engine.(im doing the clutch).. i see its a push bearing system has anyone tips on reinstalling the gearbox to make it easier. Thank you Bill

Ok f430 tb arrived and adaptor and hose ordered from hpr. Anything to be aware of or should it be errrrrrr....straight forward.........

Anyone share their experience fitting ferarri f430 tb to 3.2 busso?

Anyone share their experience of fitting f430 throttle body to a 3.2 busso?

What's involved in fitting 2.4 brembo calipers to a 159 1.9JTDm? Is it a straight bolt on job? Do you need to change to the larger discs or can you use them with the standard ones? I'm running 17" wheels already.