drivetrain

I have 159 1.9 JTDm 16V with swaped F40 gearbox. It uses driveshafts, gearbox and engine mounts from 2.0 JTDm. Currently building GTB2060 hybrid and planning to reach 300HP/600NM (currently 260HP/505NM with GT1756). Will driveshafts handle that much of torque? Is there any uprated driveshafts...

Hi, after much-shorter-than-I-hoped time I experienced my first "road-end" problem. I would like to know opinions of more experienced owners. So, in the morning I drive off to work and on first cross-section the car jumped up few times in 1st, then I drove few dozen meters and after that it...

My 2.0 GTV has done 144k. The engine feels pretty fit still but is due belts and making variator-like noises from the top end, and while not smoking or leaking is using plenty of oil, by which I mean maybe 1lt/500 miles. Additionally the synchros are crunchy on 4th and 5th, and the clutch...

At least face me with dedicated thread if any. Car is AR159, 19JTDM16V, manual, 130tkms. Noise is mentioned from passenger side ( LHD car ). Noise character is a variable mix of crunch and rattle. Noise is clutch independent. Noticed at neutral roll and constant drive with 1st, or 2nd gear...

So, I have had possibility to use my family Giu daily basis since main seater for this car left for another sun portion. I have noticed some noise coming. It happens than you start drive with first gear engaged, also start drive with rear gear engaged and also with a second gear engaged riding...

Evening all, I have been neglecting my GTV6 recently after my 159 failed its MOT. Now that's ok again I have been fixing a few issues on my GTV6, the air leak and exhaust leak are now sorted but I am left with an annoying issue I have had for a year, and it's getting worse! While driving after...

Am looking at a 159 2.4 Ti at the weekend and have a question regarding remaps. At the moment I have a 156 JTD 16v (facelift one) & it has been remapped by Alfatune (Via JJB motors in York). The power/drivability is wonderful :thumbs:but have needed a clutch and two genuine Alfa Drive shafts...

Ok guys next problem. Have a noticeable vibration my my 2ltr GTV(1972). As I've posted this car has been off the road for 20yrs and is just back on. Anyway had a very bad vibration which got worse as she has been driven from the drivetrain. Anything above 2000rpm to about 4000rpm , goes...

Have an 09 159ti. 20.5k miles on purchase from authorised dealer. Noticed grinding noise on front end very soon after picking up. Assumed it was sticking brakes & took back. Service dept checked over brakes & said could be due to car being stood on forecourt. Got car back but grinding still...

Hi guys, I have recently bought a 1983 alfasud S/C with a s2 33 1.7 16v engine, I have got the for a project and was wondering if it would be possible to install a P4 drivetrain, if so what sort of work would i be looking at and does anybody have one for sale? P.S. as you can probably tell i...

Since I can't find any topic that could help me I guess I can start a new one.. I just got my new car mount for iPhone 4 and I'm so curious to test out the Dynolicious app that "what they say" is 99% accurate... The only thing left to enter to get the engine power is the % of drivetrain loss...

I drove my car from Gloucester to Tenby (winter storage). Over the Summer months' I'd used the car quite a bit and there were no warnings of any rumbling noises in the drive train. When I set off for Tenby everything was OK, with 40 miles to go I stopped to refuel and it was at this point I...

My GTV has developed a noise in the from the clutch/gearbox area and i cant work out what it is. I had a new GTA clutch,soild flywheel,new slave cylinder & new gearbox oil on wednesday and now has this noise :( The noise is on acceleration in 4th 5th and 6th only and sounds like a raspy type...

My GTA (approx 30,000m) has developed a strange noise from the drivetrain which started out as click at slow speeds coming from the offside front wheel at about once each revolution of the wheel which sounded like cv trouble. I took it to the main dealer where I bought the car who changed the...

Which drivetrain setup would you like best on an Alfa:confused:

Ello Chaps, I am a current owner of 2 155's, one of which is soon to be retired with only 60K on the engine, as soon as I have finished removing all parts Im looking to transplant to the other one, which is obviously a replacement for the illness that is the Alfa marque. My question to you is...

Hi all, When I pull away with full lock steering to the left, or make a very tight left turn in 1st or 2nd gear, (also with full lock steering) , I hear a sound like "clonk" coming from the drivetrain of front suspension. Sometimes it makes a cracking sound, which worries me.. The sounds occurs...

Hey All, Assuming that the engine were able to produce limitless power, how much would you reasonably expect the P4 drivetrain to put up with, without breaking every five minutes? And which part do you think would be the first to go? Any opinions welcome.

Can anyone tell me whether it is possible to eliminate the drivetrain vibration from the centre diff of the Permanent 4? I have always wanted one but the only one I have driven had a bad shudder under the centre of the car when going slowly around tight corners. Does anyone know if this is...