need to buy Disc Brake Pad to my veloce
this fit to the car ?
Hi, I’m almost due to have the front discs replaced on my 147 JTD 16v.. I’ve seen some MTECH drilled/slotted discs that do look damn good & not a lot different in price to std discs. Does anyone have any experience with these? How do they perform compared to std discs. Thanks for any info
You know those jobs you start thinking they'll be straightforward...?
I set out to tighten up the handbrake using the adjuster mechanism. When I looked closely at the adjuster, the brass cog had completely stripped so there was no way to turn it without getting close to the shoes.
Hi, I'm planning to change the rear discs and pads in the next day or two. I've read what I can find about it and I've done the same job on other cars.
I have the pads, discs and a wind back tool. I need to pick up a set of Torx sockets as from what I've read, it's those torx e (star shaped...
Hi there, just wondering if any in this forum has bought EBC disc brakes and had problems with them
I just bought a pair of rotors , shipped overseas (ton of money in shipping) and they where defective (bent).
When my mechanic was going to test the brakes he noticed that they where bent, (later...
I’ve got a bit of a problem.
I’m trying to change the discs on my Brera. Having got over a set back or two, I’ve finally got to changing the disc and now the training screw is stuck solid and guess what. I’ve stripped it.
I’m going to have to drill it out.
Things to be...
Hello. Last night I noticed my brakes making a weird scratching sound when braking (mostly when braking hard) and when it was light outside today i checked them all and noticed a deep scratch on the left rear brake disc and when driving again it was clear to hear that the noise was coming from...
I am changing the front discs and pads on my 2.0 JTDm, although I am struggling to remove this rigid brake pipe clip on the strut (nervous about damaging the pipe!) which will allow me to move the caliper out of the way. I have cleaned around the area but still unsure. Hoping someone on the...
Please forgive my badly English.
I’m going to change the brake dics and pad as it got worn on my 1.4MA G with the Brembo calipers.
I’m quite sure to get the C hook MTEC dics but still thinking of the pads.
I’m considering EBC yellow stuffs / the MX72 plus for daily drive and sometimes be...
Looking to swap my front discs soon as they have warped after only 6months or so (no idea how???), was wondering if anyone has put the brembo version (or other high performance make) on or just went for a stock version? Is the extra cost worth it?
I have been looking around and just don't seem to be able fond the answer. I need to buy a new set of front discs and pad however when I go on line to buy I get the option of two different sizes. 286mm and 305mm, I have a 1.6JTDM 105HP. Any ideas as to which size disc are the correct...
I'm looking to replace both the front and rear discs on my 2008 2.4D Brera.
Because workshop manuals are a bit sparse, I'm after advise / step by step guide etc.
Any thoughts or comments.
Brake disc size followed by pads/disc change
Giulietta needs new pads and discs all round.
Been quoted silly prices at local garages so giving it a crack myself as fairly competent with these types of things. (And watched plenty of Youtube vids)
One thing. I've crudely measured the...
I'm going to change my discs soon.
Is best practice to remove the caliper by removing the Allen head bolts on the caliper or the hex head bolts behind the caliper?
I know it's much of a muchness, but what's the 'correct' way?
I have a 2010 159 ti.
I'm looking for a full set of brake disc back plates (mine are all corroded) I've seen some on ricambi.alfisti.net but they're more expensive than I expected.
Anyone know of another reliable source for these items?