dimensions

Hi,i intend to replace the front disks and pads,basically doubling the car value in one swift move. Trouble is,on EuroCarParts and CarParts4Less there is a difference of height,one says 62mm and one says 59mm. I have no idea which to choose,would all fit?or do i just go to the mechanic only to...

Dear friends, I lust after a set of alfa 156 seats, offered at a good price. However, I don't have a 156. Can someone be kind enough to share its dimensions to me? Both front and rears. Then I would know whether they would fit in my economobile. TIA

Ive found why I have no heater, some***ing "expert" has bypassed the heater with a U bend instead of doing the work properly. A hunt around Ebay shows 2 different sizes, one for non a/c, one for a/c, I have a/c but I thought all 166s had it?

Hi guys I've just had the sportywagon fail its MOT due to a broken front nearside spring which is a PITA not just for the time to replace but also as it is fitted with a Koni suspension kit (very old and rusty) so I need to find a replacement the has the same top and bottom diameters as these...

Hello their guys im looking for some information regarding the 2.4 fiat derv unit, im looking for the length width and height of the engine please if anyone can help me it it would be great, thanks (p.s ive looked on google but got no were)

Hey all! Seemingly a simple question, but one that I couldn't definitely answer through forum trawling and general googlery - What are the fitment dimensions (offset & width) of the original Blackline alloys? Finding info that says ET 33 to ET 35, and 7.5 J to 8 J... So anyone got some...

Morning. I'm speaking to a metalwork company about getting an aluminium undertray made for my 2.4 159. Currently the price is looking very good, which includes laser cutting. However, I'm sure I've seen a scaled drawing of the undertray on here, but have spent hours since looking for it again...

Hi, I'm thinking about buying a Brera Spider and wondered if anyone could tell me the dimensions of the rear bench behind the seats? (I'm hoping to lay a guitar case that is 1.2 x 0.3m across it if possible) Thanks :)

I'm looking to replace the bleed nipples on my 156 2.0 jts 2004 (ATE calipers) with stainless ones. I cant take them out untill I replace them therefor I cant measure the length or thread size. Can anyone help?

The centre fuel tank strap disintegrated on my 156 2.4JTD Sportwagon and I need to replaced. However being the mean old git that I am, I refuse to pay the best part of £50 for a new one and all the used ones I've seen are almost as bad as my original. Before my life as a graphic designer I...

Hi All I wonder if someone could help, I am looking at buying a 159 spider, but this depends on if I can fit my Ice Hockey kit in the boot (they are quite big), and for that matter, a stick in the cabin! Would someone happen to know the rough dimensions of the boot space? I couldn't find them...

Any one know the stock V6 24v Dimensions for the camshafts. I have 4 sets and want to re-profile/use the set with the least wear , Bottom to peak of lobe will do if possible. Thanks

can anyone help? need length, width and preferably a pic showing profile of the pin.

Hi all, Does anyone know the Diameter of the ends of the intake pipe (connection to the curved pipe that connects to throttle body and connection to the MAF) Essentially the diameter of the ends of the black pipe with the resonator..... Cheers

Hey!! does anybody know dimensions for 916 spider hardtop? or maybe softop (it should be close the dimensions i guess ) Thanks in advance

Hi I have just picked up a 147 and it has the classic wobble in the gear selector, not conducive to sporty driving... I understand it to be the bush running off the gear knob as a gadget geek I have a 3d printer and wanted to see if I can produce a replacement bush at home so others could also...

Anyone on here with the glass sunroof? If you have one can you do me a favour and measure it for me? I need the length and width across the middle of the glass. Cheers Guy

I need the dimensions of the biggest intercooler it can fit on 147 prefacelift. I want to use Garrett TB2810 but i have heard that it blows if you decat.Do you know if its true? Which glow plug model should i use?I guess 7 coldness. How can i fit the gearbox 5speed from coupe?I think i will...

I want to place an order on Monday and i want to know the dimensions of the biggest intercooler it can fit on 147 prefacelift model. Also can someone send me a diagram or explain how will i fit oil cooler,oil catch can,and turbo oil supply and return on TS. Thanks a lot :) Happy Easter!

If anyone with OE mudflaps has a couple of minutes could they run a tape measure over them? Longest side and bottom, front and rear would be great. Ta muchly rich.