connector

When changing the spark plugs I noticed that the yellow clips on the coil pack connectors had gone brittle and had either completely broken off or were only secured on the one side. Where could I find replacements and how easy are they to change?

Morning Alfisti. Have the V6 owners among us ever found a supplier for the small retaining clips that secure the engine loom connectors to the coil packs? They don’t seem to be a standard thing which I suppose isn’t surprising... Thanks 👍

Hi, need some help with identifying. What is this connector? It is located between glow plug pre head relay and coolant tank. Model is AR 159, 2008, 1.9 JTDM. Got car after engine repair/timing belt replacement. After week of driving decided to clean engine bay a lil bit and found this...

need to replace my maf connector does anyone have a part number or a link to where i can get one. Thanks

All, I need to leverage the power of the forum for a bit of help! I wondered if anyone has the pin out for the car side of the audio connector in an Alfa Mito? I have just fitted an aftermarket unit and the steering controls do not work. Need to find which wires from the car are key0, Key1 and...

Greetings! We're trying to fit memory seats into my 2002 166 which had non-electric seats up until now. Can anyone tell me what is this black connector for? :) Cheers!

Hello everyone. Despite my best efforts to find a solution on this forum and the elsewhere on the internet, I've hit a brick wall with this one. My air con doesn't work and the fault has been diagnosed as my compressor needing to be replaced. So I provided my VIN number to several suppliers all...

I'm finishing off the engine re-install and have not had problems with other parts of the electrical system. BUT, this connector is refusing to connect! I definitely have it the right way round (it can only go one way) but it the male part just doesn't want to do its duty and connect with the...

Hi all anyone tell me if I can buy a replacement valve for the breather pipe on cf3 I have misplaced mine cant find the damn thing. I have blanked it of but its not a perfect fit don't want an air leak and I want some form of oil lubrication so wanting to put it back on. Can you get another...

So decided I’d finally overhaul the engine cover and plenum and fit my new chrome inlet runners seeing as the weather was good. When taking off the fuel rails the grey plastic elbow that connects to them sheared. The other bit is still in the rubber hose. What are my options? Are the plastic...

Discovered this disconnected behind the passenger side headlight, everything seems to be working except the DLRs but I don't think its related.

Hi guys Bought a 3.0 1996 recently and I’m going through all the quirks and faults that a car this old obviously has. The electric window on driver side (lhd) didn’t work so I bought a second hand motor which didn’t fit because my car is older. Nevertheless I checked the connector again just to...

Bad connection in this white connector that powers the window motor. High current has deteriorated the contacts so i need to get a new one. Does anyone know what type of connector this is or where i can get one, perhaps the part number from Alfa, although i suspect they only sell the whole door...

Whilst behind the boot carpet taking pics of my electric aerial for another thread, I've found an unconnected cable! Not aware of anything not working, my initial thoughts are for a heated rear-screen maybe?

Hi! Trying to sort one problem, got another worst than the first one, I think. After changing fuel pumps, I now get a fuel leak from the white hose connector. All looks good in one place and fitting tight, but with engine working a lot of fuel comes out from that spot. Spare part is a hose with...

Currently in the middle of painting the grill on my mito cloverleaf. When i removed the bumper the was a lead next to the offside fog light connector not plugged in anywhere. Does anyone know what this is?!?!? ?

Cyl 3 misfire coil pack connector frazzled cant find where to get new one. Any ideas or point in direction please?

Hello Alfisti, Pre -Cat- lambdasensor on a 159 sw 1750 tbi 2010: is it a resistor-calibration- connector or just plain connector to this sensor? and where can I find one? How to replace? where to buy on WWWeb or Rotterdam area :vs_worry: help is much appreciated

Hi Guys, after spending hours with searching for the diag connector I am asking for help. I know, it should be around the middle console but there I did not see any chance to find any. I removed all possible covers around the dash and right side but nothing. In the middle there are no covers...

i have managed to remove the airbag ecu. by all accounts i should be able to plug in a kkl lead with a 3 pin adapter into a port to read the codes and hopefully clear them. but for the life of me i cannot find it. i thought it might be on the ecu but its not nor can i find anything nearby to its...