Alfa Romeo Forum banner

cda

  1. BMC CDA / OTA for Giulietta

    Alfa Giulietta
    HI all, I just heard the intake sound become bigger compare to the bmc air filter and slightly faster throttle response. Did any owner here had change the stock air box to the bmc CDA / OTA air box? any comments? it would be really great if you can provide the model / size you got! thank you...
  2. BMC CDA Intake system for an Alfa 156 1.9JTD

    Alfa 147, 156 & GT
    Has any fitted a BMC CDA intake system and an Alfa 156 1.9 JTD?
  3. V6 bmc cda

    Alfa GTV & 916 Spider
    Hi Looked at previous threads about fitting a CDA I understand I can move the Maf to the end of the intake pipe (although maf diameter appears to be on the small side) but I guess may jubilee up?? then the original 90 elbow into the engine side of the CDA, some how mount secure it. So my first...
  4. BMC CDA Question

    Alfa GTV & 916 Spider
    I have just bought a BMC CDA kit for my GTV JTS ( every little helps, as they say...) Has anyone here fitted this kit? Was it quick/straightforward? Any opinions/tips/hints - or even photos - would be greatly appreciated. I don’t expect any jaw-dropping improvements, just a slightly less...
  5. Need some help installing my BCM CDA air filter

    Alfa 147, 156 & GT
    Hey guys I tried to install my CDA air filter today but I´m running into some issues. The filter is too low now to fit the duct on the bottom of the filter. And if I want to put it higher the MAF sensor touches the coolant hose. I feel like there is very little space and i´m sure I have to...
  6. 2.4 20 CDA pipework

    Alfa 147, 156 & GT
    Hopefully someone can give me some pointers with this. Basically just got a used BMC CDA box( just the carbon container and the filter, no pipework) removed from a 1.9 CDTi Vauxhall Astra, cost me nothing so thought I would be able to adapt it to fit the 2.4, but am at a loss as to how it...
  7. K&N, BMC or CDA?

    South Africa
    I would like to fit a replacement filter on my GTV. I'm not looking for an exposed cone but rather a drop-in cylindrical filter or replacement airbox like CDA. Here are options that I am considering: 1. BMC CDA airbox 2. Drop-in K&N cylindrical filter 3. Drop-in BMC cylindrical filter If I use...
  8. CDA cleaning?

    Alfa GTA
    I have CDA induction thingy fitted to my car. It has been on there since about 2010 I think. I personally have never actually looked inside and I do not know if anyone else has looked inside when it has been serviced. I had a quick look today and can't obviously see from where it is located...
  9. 156 gta cda photos please

    Alfa GTA
    Guys I'm fitting my cda (well trying to) where have you all secured it to as I'm struggling to find somewhere and the instructions are rubbish at best.I've got the crappy red bracket thing but it seems to long. Help much appreciated.
  10. Is a BMC CDA intake worth it?

    Alfa GTA
    As the title says, is it worth it? I've been reading through the forum and there are a lot of mixed emotions on the system. Some people love it some people don't. Why is this? Cheers
  11. BMC CDA 70mm?

    Engines (TS, JTS, JTD & V6)
    Hi all, I've tried searching, I've just won a 70mm bmc cda on eBay for very cheap, I understand there is also an 80mm version available, Has anyone got any experience with the 70mm version, is it any good, and is there any downsides to using it instead of the 80? I don't see why there would...
  12. WANTED: BMC CDA intake for a TS

    Alfa GTV & 916 Spider
    Im on the lookout, if anyone has one they want to sell :)
  13. BMC CDA position

    Alfa GTV & 916 Spider
    Hi guys, my 3.0 runs with a BMC CDA without a air feed pipe from the front. It had one on it but it fell off on a trip I did earlier in the year. I'm thinking of better ways to mount the CDA. Currently it sits down the front - following with stock airbox with a (used to be there) air feed pipe...
  14. Blackline Wheels and CDA Induction Kit

    Alfa GTA
    Having found a very nice 147 GTA to replace my stolen example :mad: and have almost got it as I like, I now have some bits and pieces which I need to find a good home for: Set of 4 genuine Blackline 18" wheels, no tyres (fit 147 GTA) - 2 refurbed (unused since), 1 perfect and 1 with very...
  15. Cheap CDA

    Alfa GTA
    A clear rip off of BMCs idea, but this passed my ebay eye. http://www.ebay.co.uk/itm/Universal-ASH-Carbon-Dynamic-AirBox-Fiter-CDA-76mm-/290445271381?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item439fe32155&_sid=2048038 Can't be bad for the money.
  16. BMC CDA on 2.0 TS

    Alfa GTV & 916 Spider
    Worth it or waste of money? I've heard conflicting reports, some saying it'a great and gives more power, others saying it gives less power and just noisy!
  17. Wanted: BMC CDA & Decat Pipe

    Alfa GTA
    For a 147.. just in case anyone has these sitting around :)
  18. Used BMC CDA Induction kit...how much shall i seel it for?

    Alfa 147, 156 & GT
    Afternoon folks, Can I ask for some advice please. I have refitted my original air box to the car and now willing to sell my BMC CDA induction kit, how much should I sell/advertise it for? Thanks.
  19. Fitting BMC CDA tomorrow, any tips?

    Alfa GTV & 916 Spider
    Fitting a BMC CDA airbox tomorrow to my 1999 2.0! Was wondering if anyone has any tips, would be hugely greatfull as am only a novice. Callum
  20. Anybody used this instead of BMC CDA ?

    Alfa GTV & 916 Spider
    As per the title, just came across this and looks very similar the BMC unit but a lot cheaper. Carbon Airbox - Performance Induction Air Filter Thoughts anyone ?
Top