Search Results for ‘bung’

Hi everyone, Has anyone dewipered a G? Does anyone know what size bung i would need to fill the hole? Thanks.

Trying to diagnose where the leak is coming from in my 147, both foot wells are damp. Definitely not coming from the scuttle drain hole or the door cards/seals. I'm led to believe that these holes behind the wheel arches should have a rubber bung? Neither of my wheel arches have a bung and it...

Recenlty noticed that the blanking bung type thing is missing off my gearbox. Anyone got one? Pics attached for info

Hi. Have just bought and fitted a new radiator from Boston Rads. The plastic bung (where some models have a temp sensor/fan switch) has failed and water is leaking from it. Boston are sending me a replacement (not here today) and I have bought a brass fitting from the local plumbers merchants...

afternoon all, couple of questions; 1) After a particularly thorough pressure wash, the parking sensors either side of the number plate are knacked - the left one gives nothing at all unless you press your thumb against it, at which point the car makes the high pitched "sensors is knackered"...

Hi guys, just in the middle of fitting a Fmic to my 147 Jtdm, got all the pipework sorted, it's coming back off to get bead rolled this week so looking to get it all back on next week. Only thing I haven't done yet it chop the resonator off the airbox and just wondered if anyone knows off the...

hi guys does any one out there in alfa land know of this so called sump bung from alfa shop cant find them any were so some help for me please to try and find one my local kwik fit want £200 quid for there expert to do it for me if the sump plug goes the way they do:thumbs:

Hi, Could anyone tell me the thread pitch and diameter for the T.spark sump bung as i need to fit a helicoil to mine?? Used to have a helicoil kit for this but cannot find it anywhere so need buy a new one. Thanks Sam

i changed my oil and filter over the w/end which i aim to do every 6 month,all is going well until i put sump plug in and nearly strip the threads ,aluminium sump steel bung ,anyway i ended up using a mile of ptfe tape and have stopped it dripping,lucky for me,now i will be sucking the oil out...