brembos

Is it gonna be a straight swap or are we looking at changing the hub and everything which may not be worth it? I really dig the look of the larger front brake callipers in the post 08 models.

Can anybody enlighten me whether the 4-pot Brembos from a 166 V6 will fit onto my 156 V6 2.5?? I already have 166 wheels which should hopefully clear the bigger calipers. I appreciate I will need 166 discs too which are 310mm Thanks in advance :thumbup:

Hi, I've noticed that my Sportiva with the upgraded Brembo brakes squeak when stopping for traffic and low-ish speeds is this normal? If not, how can I address it? Cheers

Good day, I could not find a place where to post an ad, so I posted here. Please move it if I posted in the wrong place and I am sorry. Looking for all options 18-19 inch, preferably the TI 19s, but will consider all others too. Prices not higher than 400 pounds (or same converted to Euros)...

Refurbed my Brembos My brakes were looking a little past their best, especially after having the wheels refurbished recently. One side wasn't too bad but the other had lost most of its lacquer and turned a nice shade of matt pink. The cost to get them powder coated was too expensive to justify...

Hear me out this is a strange one. I am getting my alloys powdercoated by a local company that does all sorts for powdercoating bits of classic cars. Problem is they do not have facilities for taking tyres off. (I know) Question is I have some 17 inch 5 hole Selespeed alloy wheels that I am in...

Hi guys, Looking to upgrade the brakes from standard to brembos if possible. I've searched but can't seem to find the info I need. Can anyone tell me whether I can pick up some calipers from another car? If so, will they go straight on or will I need brackets etc? Also what size discs can be...

Hi, sorry for the dumb question, but I want to replace my front disks on my Brera S, it has the 330mm disks with Brembo callipers. My concern is that on the back of the calliper there is a solid brake pipe connected, so I am thinking to remove the calliper to allow me to fit the disks, I will...

Hello, I need a new set of wheels for my 2008 2,4 diesel with Brembo calipers in the front. I plan to stick with 17" and 225/50 due to budget and comfort. Any one here who knows if any of the following wheels fits my car without interfering with the calipers: ATS Emotion 17x7.5 ET35 Ronal R54...

Hi, I've got a pair of 156 GTA upright and a set of 4-pot brembo from a Fiat Coupe 20V Turbo, and a pair of new 305mm discs. I want to fit these to my existing 2.0TS 156. I've also got a set of 17" GTA rims for the fitment. I know the wheel bearing for 2.0TS needs to be swapped to the GTA...

Hi All Can someone tell me the specs of the factory fitted Brembo red calipers, discs and pads on a 2010 159 Ti? Did a quick search but saw no specific reference. Thanks :thumbs:

Possibly looking at buying a set of the WSP Italy W251 gunmetal wheels (159 Ti reps) but the one thing i'm struggling to find is if the 19's fit over the standard Brembo's on the Brera or 159 (assuming it's the same setup on some 159's) I've searched and found a few people that have had no...

I bought a set of old GTV brembos a while back - any ideas how much it is to have it stripped, refurbished and powder coated? I have the relevant refurbishing parts but I can't get the screws which hold the 2 halves together which is why I think I need it professionally done.

I traded my Mito QV for a GQV a while back now and was left with a full set of replacement brembo discs and pads. i was hoping i could keep them for the g but I've been informed they're not compatible so could do with getting rid if anyones interested...

Hi, Trying to find sensibly priced front brake pad pins for Brembo 305 mm callipers. These seem to be much more expensive than the longer 330 mm pins as the prices I'm seeing are around £100 for a set!

Could someone nip out to their TB or QV and measure the distance from the brake disc face to the front of the caliper body please, thanks :) wrinx

Okay, been searching and cannot seem to find a definitive answer on this. Can anyone tell me exactly what parts are required to fit Brembos from a 166, to a 156 2.5 V6? As far as I can tell it is 166 calipers and pads, different discs (but which?!) and custom brackets. Am I missing any other...

My giuli has just eaten it,s front pads in 21,000 mile,apparently the brembo pads only have 100 mm of pad material on them compared to standard pads which have double that,my local alfa dealers gave me a quote of 203 quid to supply and fit:wow:,this includes one new fitting kit at 43 quid cos...

What do I need to upgrade my 2.0 GTV to the brembos from the V6. Obviously calipers and discs but what else. Hubs and uprights? Is that all?

Hello folks, do you know the brembo kit from 2.0ts are pcd 2x100 or is similar like 3.0 v6 version with 2x130mm. If somebody know they are plug and play? I had before from 3.0 v6 brembos but didn't fix them because I need special spacers(mine is 2.0ts). Thank you and sorry for my english: )