Alfa Romeo Forum banner

brembo

  1. Adapter for using Alfa 166 Brembo Calipers on GTV 916

    Alfa GTV & 916 Spider
    Hello, I am looking for an adapter for using Alfa 166 Brembo Calipers on GTV 916. I would want to use the 305x28mm discs and not the 330x28mm. This would have been the perfect adapter: Link … but they are not producing anymore. Are there any other sources/suppliers? Thank you!
  2. Brembo Caliper woes...

    Alfa Giulietta
    Evening all, So I attempted to change the front pads on my Giulietta at the weekend. Anticipating the struggle with the pins. New ones were ordered, punches and dremel on hand if required. Got the passenger side changed after a bit of a battle with the pins. But the driver's...
  3. 2.4 brembo caliper upgrade

    Alfa 159, Brera & 946 Spider
    I have the calipers and hubs etc. Do you also need different flexible hoses?
  4. Giulietta Brembo pads & Service parts

    Alfa Giulietta
    Hi All, First post so be gentle! I have recently just purchased a 2010 Giulietta (1.4 Multiair) with the upgraded Brembo brakes. This forum has been a fantastic help so far - however, i am struggling with which pads the vehicle uses. ECP has 'another' sale on, but is giving me two options for...
  5. 159 Brembo bolts

    Alfa 159, Brera & 946 Spider
    I've searched but cannot find the correct torx socket size for the Brembo calipers. I did find 19E but if that is correct I can't find a socket. The car is a 2011 2.0 Lusso. Can anyone help?
  6. Brembo 305 Drilled and Grooved Discs + Pads For sale

    Alfa GTA
    Got some barely used drilled and grooved 305 Brembo discs and barely used pads for sale if anyones interested.
  7. Brembo 305 Drilled and Grooved Discs + Pads For sale

    Alfa 147, 156 & GT
    Got some barely used drilled and grooved 305 Brembo discs and barely used pads for sale if anyones interested.
  8. Brembo 305 Drilled and Grooved Discs + Pads For sale

    Alfa GTV & 916 Spider
    Got some barely used drilled and grooved 305 Brembo discs and barely used pads for sale if anyones interested.
  9. 159/Brera Brembo Conversion Kit For Sale

    Alfa 159, Brera & 946 Spider
    I was wondering if anyone with a non-Brembo 159 or Brera would be interested in a conversion kit I have. It consists of: 2 x Brembo Calipers 2 x Brembo discs Brembo Pads Set 2 x new front brake hoses (longer than original) Pictures to follow This will convert the original braking to a Brembo...
  10. Brembo Vs Mtec

    General Alfa Discussion
    So it's that time where I'll shortly need new discs as mine are looking a little worn though and I'm reading up on getting some Mtec's for the 159 , lots and lots of conflicting views on these vs the Bremobo's as standard. Now the Brembo's are fine with the pads I have which are also standard ...
  11. Front Brembo rebuild question

    Alfa GTV & 916 Spider
    Hi, Have some issues with original Brembos (stuck bleed nipples and corrosion under the plates causing ill fitting pads). Have decided to purchase a couple of secondhand ones and rebuild them to swap out as I need some contingency if I snap the seized bleed nipples off. Talked this through...
  12. Brembo pad replacements

    Alfa Giulietta
    Hi is this easy to do for a normal mechanical minded person? I'm not a car mechanic! I have the pads and a few guides. Is it worth doing or just take it to a garage??
  13. Tools required for Brembo Discs and Pads change?

    Alfa Giulietta
    Hi All, I'm going to be fitting new discs and pads on my Brembo equipped Giulietta tomorrow. Can anyone give me a guide to the socket(s) needed to remove the calipers? Are they TX Star heads or standard?
  14. Fitting brembo front calipers

    Alfa 159, Brera & 946 Spider
    What's involved in fitting 2.4 brembo calipers to a 159 1.9JTDm? Is it a straight bolt on job? Do you need to change to the larger discs or can you use them with the standard ones? I'm running 17" wheels already.
  15. Is Brera\159 Brembo Caliper set fit our G directly?

    Alfa Giulietta
    As title, since I found the the brembo disc 330mm having the same part number on Brera and 159, thanks a lot... I am a newbie to the Alfa, and the G.:rofl:
  16. Brembo Pagid pads for sale

    Alfa Giulietta
    Ordered the wrong pads for my Dad's G. His car doesn't have Brembo calipers so these are surplus to requirements. Pads are Pagid 101510518 still in box. £20 plus postage sound fair?
  17. GM VXR 18" snowflakes, will they clear 159 brembo's?

    Alfa 159, Brera & 946 Spider
    I've got the chance of getting these alloys for a princely sum of NOTHING once my cousin changes his alloys on his Astra VXR. He's going up to 20". I know the pcd its 110, 65.1 CB 8 inch width rim and an ET of 42 . They are in perfect condition as he only bought them three month ago as a...
  18. Brake Disc - Brembo Worth The Extra

    Alfa Giulietta
    Looking to swap my front discs soon as they have warped after only 6months or so (no idea how???), was wondering if anyone has put the brembo version (or other high performance make) on or just went for a stock version? Is the extra cost worth it? Cheers!
  19. Mito 120BHP brembo caliper upgrade

    Alfa MiTo
    So I've found some 305 Brembo calipers on a couple different websites (Alfashop and TMC Performance) and at the bottom of both it says 'Those calipers can only be mounted when the very car was already delivered with Brembo calipers and 305 mm diameter brake discs - it is not possible to mount...
  20. Brembo 330's - missing brackets.

    Alfa GTV & 916 Spider
    Hi all, I have an opportunity to purchase a pair of 330 Brembos from a GTA / GT 3.2 for my GTV. They are relatively cheap, but this comes down to the fact they don't have the mounting brackets. What are the chance of me getting hold of some brackets alone? New, used or re-manufactured option...
Top