Search Results for ‘breather’

I’ve got v84 on my desktop, but cannot find a specific page. What I’m looking for is the page per 147, 2.0TS that shows the vent hose from cam cover to throttle body. (For that matter, I can’t find the throttle body either!) Any pointers would be appreciated, thanks.

Hello, i have a question. My breather hose broke from my intake hose (alfa 159 2.0 Jtdm). I dont want to buy new part, so im thinking maybe i will cover the hole that is in intake hose and vent out breather fumes to the atmosphere, at least till when i'll buy oil catch can or something. SO my...

While replacing the cambelt I've discovered the plastic ends of my crankcase breather tube have disintegrated letting oily fumes puff around the engine compartment. I also found out the cost of a replacement from EB Spares to be around NZ$250.00 (I couldn't find the cost of an original Alfa one...

My I47 ducati 1.9jtdm has some form of breather leak, lots of soot all over engine bay. At first I suspected was a turbo main hose ,as could hear a leak under load and got some replacements ready to fit. Also power down. Went to fit today and found seems to be another pipe. However the smoke...

I have a problem with 147 1.9 16v. The engine is blowing oil from the breather. This is happening mainly when driving in the city and when driving more aggressively when the oil/engine is not warm enough. In the moment the breather is disconnected from the turbo intake hose otherwise the oil is...

I think my gearbox (manual GQV) might be losing some oil through the little breather on top of the gbox, does anyone know if this part is replaceable? Is it a alfa specific part from the dealership or a generic part I can get somewhere else? Asking coz I was at the dealership and the parts guy...

Can some kind soul tell me where all the breather pipe locations are on a CF2 3.0 V6 engine ? I've found the obvious two places ; 1. Bottom left of plenum chamber that links in to air intake 2. Centre rear of plenum chamber that has the vapour separator in line. Are there any more on this...

Do anyone have a spare new breather valve p/n 71713715 for the TS and JTS engine they are willing to sell. If so let me know.

Hello folks.... I have a 156 V6 with a 3 Litre fitted and I need a replacement oil breather pipe.... mines split! [emoji53] It's the one that goes from the back left of the rear rocker cover to the front left of the rear plenum chamber.(see pics) Does anyone know where I can get one from...

Hello! I just need one information, when I started to work on the car a month ago, my idle was all over the place, from 500 to 1500 rpm and I managed to cure this with second hand oil breather valve. But there is still a problem of rough idle that I cannot work out. Can somebody...

Hello, Can anyone please explain what for are tubes marked red and yellow on attached picture? I also dont know why in this engine breather hose goes to intake and into manifold? It kinda sucks air skipping throttle mostly on cold engine. Red tube does the same air sucking in my opinion with...

Hi, I have a 156 1.9TDI Sportwagon which has developed a lot of smoke especially under hard acceleration. I've been told that they develop a hole in a breather pipe but I can't seem to locate it. Can anyone give me an indication as to where to look? Cheers!

Hi guys, my oil breather hose ( from head to air take) has split, looking for a replacement, as I haven't got a manual does anyone know the size ? Or a part number? Thanks

Hi guys, I seem to be getting some oily fume smells coming into the car, more so when the car is stationary in a queue or waiting at the lights etc. The fumes seem to be coming from the rear of the engine (2.4 JTDm) and it appears that the canister thing that I think is the crankcase breather...

Would a failed oil breather unit cause oil to get into the air intake of the turbo as I've got oil from the unit in the air filter pipe from the filter to the turbo

Hi! Have to change the breather hose (in link below )as the one on my 156 has rotted and collapsed. Thinking of not buying the soft rubber OEM one, as they are very expensive and don't last forever, but buying a regular more rigid hose with the same dimensions. Will I have any problems?

Finally done all the graft, milling etc to get it all to fit and notice a breather on the 360TB before the butterfly that the 147TB doesnt have should I block this? It will let in unfiktered air otherwise

Those of you who have read any of my posts recently i have fitted a rutland catch can to my GT to reduce the amount of crap in the crankcase breather system. The rutland in line filter is doing its job nicely collecting all the nasty vapour. But and this is a big but its still allowing black...

On my 150 bhp 10v, there is an adjustable screw sitting in a joint between the oil breather hose, which comes from the rocker cover, and the air intake hose, just before the turbo. It allows the screw to be tightened into the joint, effectively into the oil vapour flow. FIAT ePER The joint...

hi anyone ever used a exhaust venturi method of crankcase breather evacuation. maybe the track racing guys ? ever tested how much vacuum it pulled ? any info to add please add here or here...