Alfa Romeo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 54 Results
  1. Alfa 147, 156 & GT
    Hi - I would like to replace some old, broken clips in/around the scuttle panel covers and the underside of the bonnet on my GT. In order to find out factory locations, how many of a given part there were when new, prices & availability, would I need ePer? If so, is this something I need to...
  2. Alfa GTA
    Hi, does anyone know if the metal plates at the top of the front and rear bumpers are available individually... Couldn't see them on EPER and mine look like they've been at the bottom of the sea.
  3. Alfa 159, Brera & Spider
    Hi All My Brera was in for some preventative maintenance regarding the front subframe at the suggestion of the garage owning mechanic I have used for over 25 years and it was found that the 2 pair of brackets (A & B) that attach to the front of the front subframe are in a pretty sorry state...
  4. Alfa GTV & 916 Spider
    Having tried to remove my corroded MAF brackets previously it resulted in spinning the captive bolt in the air box lid as the nuts were so corroded. Thinking I would have to cut them off, drill them out and fit new bolts as others on here had done previously there was nothing to lose making a...
  5. Alfa GTV & 916 Spider
    Hi all, I have an opportunity to purchase a pair of 330 Brembos from a GTA / GT 3.2 for my GTV. They are relatively cheap, but this comes down to the fact they don't have the mounting brackets. What are the chance of me getting hold of some brackets alone? New, used or re-manufactured option...
  6. Alfa 147, 156 & GT
    Hello All Does anyone have a pair of Brembo brake caliper brackets for sale? I am after the L-shaped brackets that mount the Brembo calipers to the uprights. Thanks!
  7. Alfa 159, Brera & Spider
    Due to accident damage incurred by the previous owner I have a new front bumper to get fitted. I've got the new bumper but the three brackets underneath are damaged. Does anyone know if these are available new or is it just a case of finding some second hand ones from a breakers?
  8. Alfa 159, Brera & Spider
    Anyone know where I could source a pair of parcel shelf brackets for a Brera? Discovered that mine don't have any clips, thus the parcel shelf rattles a bit. Thanks P.S. Apologies for all the questions. One would swear I've just bought a Brera!
  9. Alfa 164 & 166
    I'm looking for a new pair of 164 rear wheel caliper brackets. I've sourced the front ones, calipers and mounting bolts but am struggling with the rear ones. Does anyone here know if they are a fitment with another car? Or know where I might find a pair? Cheers Guy
  10. Alfa GTV & 916 Spider
    During rebuilding the rear brake calipers I have managed to get the brackets and sliding pins mixed up. Though the brackets / carriers look identical they have differing numbers cast into them any ideas which one is which. Also which sliding pin goes where as there is one with conical markings...
  11. General Motoring Discussion
    I know there's a few Benz aficionados here, this is not my thing but I was contacted by someone who knows my knack of sniffing out odd parts. The brackets seem dear as poison, £280-up per side for NOS. Are there interchanges or repro parts worth having? Thanks, Adam.
  12. Alfa 159, Brera & Spider
    Can anyone help me find those 2 "brackets" that hold up the under engine cover they are held on the front subframe. Sorry i dont know the proper name for the parts, i cant find them on ebay, thanks
  13. Alfa 159, Brera & Spider
    Hi all, Yesterday I've discovered that two brackets in front of my 159 (2.0, Ti, 2010, 130k miles) were quite corroded.. I lifted the car on jacks and I discovered that all the frame nearby the brakets had some patches of rust. Nothing major, I've sanded off everything with a wire brush and a...
  14. Alfa GTV & 916 Spider
    Trying to find part number for the metal brackets that hold the maf onto the air filter box on my v6. Mine are rusted blobs. Cant find on eper. Any ideas?
  15. The Classic Alfa Romeos
    After going for a spin last night in the Giulia we just bought I was reminded of driving a car fitted with a dynamo! Now I know there are a few poor joints and knackered motors to bring into the mix but having to choose what items we could have on so that the wipers did not die at idle was daft...
  16. Tuning & Upgrades
    Any got a set of brackets for converting 2.0 TS GTV, to 166 calipers using 305x28 discs?
  17. Alfa GTV & 916 Spider
    Hello folks, It's another Spider wind deflector thread! I recently picked up a second hand deflector in good nick but missing it's mounting brackets - I'm trying to track some brackets down or, failing that, am after some pictures to copy the brackets from, but this is slightly tricky given I...
  18. Alfa 147, 156 & GT
    I made some brackets to fit 295mm discs on the rear axle of Alfa 156 with 251mm OEM diameter discs. You use the same calipers, and you have to buy 295mm discs from Fiat Ulysse-Citroen Evasion-Lancia Zeta-Peugeot 806 (part number: Brembo 08.5898.10)...
  19. Alfa 147, 156 & GT
    hello can anyone tell of a suppler for the steel brackets that hold the bush and bolt onto the the cross member regards fala..............
  20. Alfa 147, 156 & GT
    I have machined 2 more sets of these brackets will be putting them on ebay but thought id notify people on here first see if anyone is interested. I have these on my gt with no issues using the 166 brembos, 166 310mm brembo discs and 166 brembo pads. One of the best mods I did. Message me if...
1-20 of 54 Results