bolts

Hey, a bit confused regarding what bolts I need to use with the 17" teledials, I know that I need M12 x 1.25, My old set of bolts are 25mm long for the locks and 23mm for the normal bolts Will the McGuard 27216SU fit ? (22mm long) and what length do i need for the normal bolts, is 26mm also...

I am feeling very happy I finally got a 75 twinspark engine for the alfetta. However there are a few things missing. I recently got a bellhousing for it, but I do not have the bolts that attach it to the block. I'd like to take my time and get the engine and bellhousing and starter all bolted up...

Hu guys my new discs n pads have arrived I have been doing my own for years on my gtv and spider however first time on the guilietta so any tips welcome. I have just had a quick look and their are star looking bolts on the back of the caliper holder, I'm assuming these will need removing to...

It looks like somebody has removed the headlights from my 156 at some point by cutting or grinding off the top mounting bolts. Savages. The lights wobble a bit and the car has just failed its MOT on headlight aim, among a couple of other issues. Any ideas on how to fix this? The bolts are...

Hi all, I am looking for a set of engine mounting bolts. The new mounts apparently do not come with the actual bolts, and I need to reuse the existing, which I do not want to do. Anyone know from where to order new bolts?

Hello All ! I am planning on replacing the 20 wheel bolts on my Spider because of their condition / appearance. I tried searching for a set of bolts but something a bit better than the normal steel - galvanized ones. Does anybody knows if such thing as "lightweight" bolts for wheels exists ...

Hi guys I have just refurbished the trailing arms for my brera I am going re fit them now, so could someone tell me what torque the bolts need to be tightened to please? I haven’t got an Elearn CD so could someone help me out please Many thanks in advance

This autumn, I'll be doing a suspension overhaul on my 156. I have more or less decided on the suspension setup I want, but what can I expect for stuck bolts? - Front pinch bolt, I know - Rear lower strut bolt? Last time I went to get my car aligned, the rear cam/toe bolts was more or less...

I've recently purchased a 08 159 2.4 JTDm and during the "new" car inspection and fixs I've been told that the rear alignment can't be done due to seized screws. Aparently I'll need the screws and the bush but i can't find any definite answer to which part numbers I'll need to do this repair...

Just wondering if anyone can confirm the torque settings for the caliper carrier bolts (7mm hex) and caliper bolts (19mm socket) on the front calipers? This thread mentions the front caliper bolts are 22-32Nm. I assume this is the 7mm hex bolts as it sounds too low for the ones with the 19mm...

Can anyone tell me the correct length for the 3 M6 engine cover bolts please? Thank you!

I'm going to replace the engine mount on my 2015 1.4 MA TCT - drivers side - the one under the coolant tank. Has anyone got the torque figures for the bolts? TIA!

Looking to replace these with shiny new ones. The question is... who sells them? Ta!

I'm still on track for switching out my suspension for the St.X Coilovers... But I'm going to need new pinch bolts for the suspension forks. The existing ones are heavily rounded and will be LOTS OF FUN to get out. The only thing is, there seem to be two types of bolts to buy: Before...

Hey fellow 159 owners, just had her in for a wheel alignment and the bolts are all seized up (I ahve only had my alfa for just over a year now). They had the heat "glowing" apparently and were just unable to get them to move at the Tyre garage. I believe that I may need to order all the bolts...

Hi Folks, So my 1999 Phase 2 Spider is at the garage having a few bit done (exhaust, filters.. nothing major). The guys there have said that the bolts in the wheels are too short for the wheels to be safely attached to the hubs. Torquing them up to the recommended amount is pulling the threads...

Does anyone know the size of the thermostat bolts? and where to buy them from? I've noticed that the top bolt on mine is nowhere to be seen Tia

Hi all, Hoping someone can help me with this So last weekend I changed the brake discs and pads on front an rear, however the rear bolts have came loose on the rear caliper, the problem I now have is does anyone know what size bolts these are? It's the ones with the 8mm Allen key fitment on...

I've searched but cannot find the correct torx socket size for the Brembo calipers. I did find 19E but if that is correct I can't find a socket. The car is a 2011 2.0 Lusso. Can anyone help?

Just started on a refurb on the front suspension (new shocks, springs, wishbones and drop links) and so far I’ve only managed to get the two bolts off the bottom of on of the struts using an angle grinder. I’ve still got another 30 assorted nuts and bolts to undo including the drop links and...