Alfa Romeo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 194 Results
  1. Alfa Giulietta
    Morning All, after a service last week I’ve been advised to swap out my ARB because the bushes have started to perish. (95k ain’t bad though!!) after quoting me 700 odd quid I thought it’s another job for me and my trusty wrench. anyone have any recommendations on where to buy the ARB itself...
  2. Alfa GTV & 916 Spider
    I have a GTV TS currently running on Koni shocks and Eibach pro springs (20mm drop). From what I've read on the forum this seems like quite a common modification, however I have found that, on the rear of the car, the nut for the anti roll bar is in contact with one of the shocks with very...
  3. Alfa 147, 156 & GT
    Hi Guys, I am going to replace the front ARB bushes on my Q2 sport. Do I need the "standard" bushes or the GTA ones? I thought the Q2 had the same ARB as the GTA but when I have enquired to someone selling them I'm told different. Many Thanks, Bertie
  4. Alfa GTV & 916 Spider
    I'm getting started with a complete rear suspension rebuild - mostly with new parts. I'm currently trying to fit the rear ARB to the subframe with new Powerflex bushes. The problem is the lip of the bush on one side prevents me being able to bolt the stays on. (See pictures). I'm thinking of...
  5. Alfa 147, 156 & GT
    I'll not be doing this any time soon but when I do come to replace them I'll do what I did with an Impreza I owned some years ago. After replacing the bushes I still had a 'knock', I then removed the new bushes, a 10 minute job on an Impreza, and replaced them with ones 1mm smaller, it's a...
  6. Alfa 164 & 166
    Hi Guys, Could someone recommend a place to buy new arb sub frame bushes please? I've seen some on fleebay but I've no idea if the quality is any good. I also need replacement bushes for the upper engine stabiliser bar. Cheers Steve
  7. The Classic Alfa Romeos
    Hi, I’ve fitted the thicker bladed front ARB tonight but I’m not sure it’s right? Everything seemed to go together well ok but there’s a lot of lateral movement in the bar as it slides from side to side through the bushes. Also the rubber seal of the drop link lower ball joint is touching the...
  8. Alfa 147, 156 & GT
    Hi all I note that there are two standard rear ARB's listed for the 156 GTA: for cars with or without Xenon lights. Will either of these fit on a CF2 2.5 V6 156? Sent from my LYA-L29 using Tapatalk
  9. Alfa 147, 156 & GT
    Hello, i have a alfa romeo gt 1.9 jtdm blackline from 2008 with KW V1 and I installed this week the eibach arb. the front bar sometimes knocks somewhere slightly. the rear of the car has now started making noises. Do you guys know what might be the cause of these 2 problems and how to fix it...
  10. Alfa 147, 156 & GT
    Hi guys! My '05 GT JTD has a knocking sound in the front when I'm going over some speed bumps, pot holes or uneven road after my ARB bushes have been changed, as if the wheels are shaking off. My upper wishbones were changed around a month ago - at the same mechanic, not an Alfa specialist but...
  11. Alfa GTV & 916 Spider
    Hello all, Apologies this seems a stupid question - was there an obvious split between vehciles fitted with an 18 or 21mm rear ARB? I need to buy some bushes for the rear on mine but can't access the car for a while to measure them. Assuming perhaps the V6 had a larger ARB... (Mines a 96' 2.0...
  12. Alfa GTV & 916 Spider
    Hi to all,looking for Alfaholics 26mm rear ARB (whithout front ), any ideas? Thanks!
  13. Alfa 159, Brera & Spider
    Morning All, Wondering, does anybody know what the stiffness of the standard 159 anti roll bars for the 2.4 is? (qtronic if that makes a difference). I am looking to fit stiffer anti-roll bars, but it's a bit tricky because finding ARB stiffness in numbers is proving a bit tricky. So need the...
  14. Alfa 147, 156 & GT
    So, here we are, perhaps not the best location for car photography ( haslity done with a phone camera) but snapped away to capture the winter sun, which made the paintwork gleam! All to do now is to thrash her on the twisties somewhere and take some proper location shots out in the sticks! (...
  15. Alfa 147, 156 & GT
    Hi, not sure if im posting in right place, just wondered if anyone has any used or new 147 gta ARB's for sale? Thanks
  16. Alfa 147, 156 & GT
    After reading and our chat on adjustable drop links for our lowered Alfa's i thought i best look for some but the ones i found were either cheap crap or very expensive with no guarantee that they would fit . so ive made my own from cheaper drop links as a test and if they pass the test i can...
  17. Alfa GTA
    Just recently my workshop which specializes in Alfas mounted set of Eibach ARBs. They however encountered some problems after mounting front stabilizer. Eibach front stabilizer 10-20-320-VA is more bended in the middle than the standard GTA/GT 3.2 V6 one, that is why it takes more place in the...
  18. Alfa GTA
    Does anyone know for sure if the 147 GTA ARB fits a 156. As I read one fits the other but the other doesnt fit the other if you get my drift. Im looking to buy the 18mm rear sway bar for a 147 GTA to be fitted to the 156 Thanks all
  19. Alfa Giulietta
    Since a few weeks I am the proud owner of a Giulietta QV. It has H&R springs and standard shocks, running on 17". It drives good but I am convinced the turn-in could be improved stil, sharpened up. On my other car (156 GTA) I had Eibach ARB's installed last year and that greatly improved the...
  20. Alfa 147, 156 & GT
    Guys... I'm planning a full suspension rebuild/replace and I have most Bushes (poly) from a previous project that I never got round to fitting ........... My Standard GT 1.9jtd was written off 6-months ago Looking to buy set of poly ARB bushes to fit onto my Q2 Spec 1.9JTD (my...
1-20 of 194 Results