Search Results for ‘anti’

Hello. I see that many of you have replaced the standard arb of some TS with the arb from a Fiat coupé 20V thats is 23 or 24 mm. Is it possible to install them on a v6 with older droplinks type ? Is it possible to upgrade to 156 v6 or gta front arb as well ? Thanks !

As some of you might know, the 156.net forum is no more. We knew that the site was going down for a while (lack of traffic) so I took the opportunity to save some of my (hopefully) useful threads. I initially posted this July 2012 and subsequently updated the thread to include a guide on...

Does anyone know correct part number for the 24 mm TI spec front Anti Roll Bar?

Ive sent my ECU to Gus at Alfatune to be virginised, or have the anti theft CODE function removed altogether. There are pros and cons for both: Virginise, Pros, is cheaper than having immobiliser removed Cons, I only have one key, I dont know if my CODE box is functional, but a full scan of...

Ive sent my ECU to Gus at Alfatune to be virginised, or have the anti theft CODE function removed altogether. There are pros and cons for both: Virginise, Pros, is cheaper than having immobiliser removed Cons, I only have one key, I dont know if my CODE box is functional, but a full scan of...

Hi, just had my MOT done and told the mechanic it sounded like the exhaust was loose at the back somewhere as I can hear (and feel) it rapidly vibrating when driving, especially when pulling away. I expected that it needed new rubbers, however when the car was up on a lift, the mechanic invited...

So I had a peak under the bonnet today and noticed that the coolant level is low (below min) in the 'upper' reservoir. Which I believe is for the engine whereas the lower one is the Intercooler. My understanding is that Petronas Paraflu UP is the recommended top-up. However they don't sell it...

Has anyone replaced the rubber bushes on the front anti roll bar? I've just removed the front anti roll bar and although the Eper drawing shows each of the clamps as an upper and lower part, mine are joined together very well indeed and don't want to come apart. So the clamps with the rubber...

I have an 05 156 JTS and would like to upgrade all the bushes so can anyone please help me on correct diameters for the front and rear anti roll bars please it would be much appreciated, also has anyone out there ordered this kit from strongflex and how did you rate the quality. Many thanks...

1998 PH1 very early 3.0 24v as my front subframe is coming out for other work i decided to replace the front subframe bushes on the front because as far as i know they are probably original, did order these from Demon Tweaks...

Just about to remove the front sub frame so my garage can get to do the clutch and flywheel, This means my sub frame will be off the car, I really need to help with what should i be looking at and changing while this part is removed, Can you offer help as it may not be off again for some...

Next job on the horizon.... Hope it will sort out the rattle from the front end. Went for Mayle HD ones via ebay. Worked out much cheaper than euro car parts wanted. They do indeed look to be good quality and pretty heavy duty. Some photos attached.

Hi is it possible to replace the front anti roll bar bushes on a GT without dropping the subframe? Thank you.. also it will have full MOT on the 10th April and it's for sale..2006. Driving brilliant and in great condition looking £1500 ono

Afternoon all, Does anyone know where to get rear anti roll bar bushes? Not after any powerflex ones, just bog standard. Simon

Hi All Have I got this right? The Twinspark front anti roll bar if fitted to a V6 is an upgrade as it is thicker. To upgrade a Twinspark you can fit one off a Fiat Coupe as it thicker If I fit a Fiat Coupe anti roll bar to my V6 is that a better upgrade than the Twinspark one or would I be...

Noticed there looking tired going to buy some poly bushes from powerflex does anyone happen to know the sizes as there's a few 147 1.9 2004

Hi, does anyone know if the front anti roll bar bushes (2012 Giulietta Veloce) are a separate item? Or do I have to replace the whole front bar? My mechanic seems to think that the latter might be the case? Either way can someone suggest a tame main dealer that I could go to as I’ll have to have...

Hi All, My 05 3.0 sporto TI seems to bottom out on every pothole in the Fens and there are thousands! My mech had a look and the anti roll bar bushes on the front are knackered/split badly and thought it might be that so I ordered some bushes even though Alfa garage said you could'nt but then...

I am looking for some recommendations. On the G and my other car some parts of the car which are subjected to stone chips and gravel rash need repainting. I am thinking of applying a form of anti stonechip coating which can be painted over to protect the metalwork. Has anyone got any...

Hi all, upgraded the roll bars on my GTA, so the OEM ones are available if anyone wants them as an upgrade. They're in decent condition. Not sure what they're worth, so please send me an offer. Cheers