Alfa Romeo Forum banner


  1. Aluminium doortrim looks like it is covered with transparant spray

    Alfa 159, Brera & 946 Spider
    Hi all, I am looking for a used Brera and i have seen 3 now and all 3 have aluminium doortrims but on all it looks like there are drops or drips from transparant spray. Is this normal? Thanks, GJ
  2. aluminium oil cap

    Alfa Giulietta
    Hi guys ive been looking to get an aluminium oil cap for my 2012 GQV does any one know the correct part that I need as ive been getting a lot of conflicting info on the one I need . one dealer gives me one part number and another...
  3. Brera aluminium trim

    Alfa 159, Brera & 946 Spider
    Hi just a update on my brera cockpit refurb after having no joy getting ally trim parts I came across a firm called imola tuning who do a dash trim kit for rhd breras in different colours including postage £100 looks really smart have a look it seems the best solution
  4. Brera aluminium trim

    Alfa 159, Brera & 946 Spider
    Hi all my interior aluminium trim is looking very sad and im looking to replace it ive managed to get the steering wheel trim but no luck with the console gear trim n door and dash bits the only new stuff left seems to be left hand drive stuff tried e bay veloces partsworld etc any other avenues...
  5. Aluminium pedal pads

    Alfa 159, Brera & 946 Spider
    I've tried to find a set of Ti style alloy pedal pads and foot rests for my manual 946 Spider. Anyone seen these for sale? I
  6. Alfa 159 nsf aluminium hub

    Alfa 159, Brera & 946 Spider
    Hi, does anyone know where i could get my hands on a aliminium nsf hub knuckle , Autolusso only have steel ones. thanks
  7. aluminium undertray

    Alfa GTV & 916 Spider
    Hi All Well I have looked and looked but obviously not in the right places! Can anyone help with a link to anyone currently selling aluminium FULL undertrays for 916 GTV/Spiders. I know all about Luffmans doing the part under trays ;) It is the FULL tray that I am after As always any help...
  8. Brera aluminium door trim

    Alfa 159, Brera & 946 Spider
    I need to refurb mine. There are a couple of dents and quite alot of scratching. The plan is to remove them, massage the dents out and re brush and lacquer them. Question is, do I have to take the door card off or do I just undo the concealed screw in the door jam and ease them off. From...
  9. Aluminium Fuel Cap

    Alfa Giulia
    Was anyone else silly enough to spec this? If so have you managed to get it to fir in the cap holder when refuelling?
  10. Aluminium Pedals

    Alfa 159, Brera & 946 Spider
    Am I missing something. I bought these Pedals from eBay and the aren't even close to fitting, the accelerator isn't even the same curve and the footrest doesn't even have the holes in the right place! Who's fitted these and how do they work? I see that even the ti or Italia Independent footrest...
  11. Aluminium Tape Covering Bodywork Holes

    Alfa 147, 156 & GT
    I was doing some rust treatment recently and came across aluminium tape covering openings in the bodywork. These are the manufactured circular holes into box sections etc, not rust holes. There seemed to be a couple around the rear suspension, maybe others but didn't look any further than the...
  12. Aluminium Nord carb mounts supplier on OLX

    South Africa
    Anybody use them before? I already have a set that I bought from Alfaholics but it would be nice if I could get as set for 45DCOE as well. Sent from my SM-G925F using Tapatalk
  13. Alfetta GTV & GTV6 aluminium coolant reservoir group buy

    The Classic Alfa Romeos
    Evening all, I have been looking in to replacement coolant bottles for my GTV6 as they generally are dirty and poorly made. The Americans have made a smart metal one, it was for sale at IAP but they don't sell them now. I can however do a group buy.... 1 at $378.49 each 3 at $303.22 each 4 at...
  14. Aluminium intake manifold swirl valve question

    Alfa 159, Brera & 946 Spider
    Hi All, Going trough this forum i see several topics regarding the famous swirl valves. I have a few questions and i didn't want to mess up the the existing specific topics on how to remove/clean them (for example) Mine 159 (1.9 JTDM 16V from 2006) has the early aluminium intake manifold which...
  15. For Sale: Aluminium Head Gasket / Decompression Plate

    Alfa 75, RZ, SZ
    Twin Spark Aluminum Head Gasket / Decompression Plate, 1.5mm, Purchased on project engine: (Into the darkness: I bought an abandoned turbo project.....) Fitted to an engine that was never started (or completed). As new condition. 100 Euro...
  16. GTA Wheels - Aluminium or Magnesium

    Alfa GTA
    As the title suggests I am about to have GTA rims refurbed (full powdercoating job) and I was asked whether they are aluminium or magnesium. I suspect the former. Can anyone confirm?
  17. Aluminium Paddles for Alfa 159 Ti 2.2 JTS

    General Alfa Discussion
    Hi All, I've exhausted my searching capabilities trying to find steering paddle replacements of the tacky plastic one's in my 159 and was wondering if anyone has done this and where they managed to get their parts from? I've come across one ones for earlier model Alfa's but they are quite long...
  18. Aluminium undertray?

    Alfa GTA
    I've been pondering getting an Alfisti alloy undertray for a while. The exchange rate now gives a price of £100 plus delivery. So probably about £115-£120. Before I splurge, there appear to be some people saying very favourable things about these trays, and some who despise them. What are the...
  19. 1.9Jtdm: Replace plastic inlet manifold with older aluminium one

    Alfa 159, Brera & 946 Spider
    Hi, Anyone know if its possible to swap the newer plastic inlet manifold on a 1.9 16v Jtdm with the more commonly available aluminium manifold? It seems the only difference is the actuator electrical connector. The later (plastic manifold) with integral swirl valves and actuator one has 6 pins...
  20. GTV / Spider Wiecher Aluminium Strut Brace for sale

    Alfa GTV & 916 Spider
    Having had a big sort out in the man cave this morning i have a strut brace off my twinspark for sale if anyone is interested i don't have the original spacers i guess washers would be more then sufficient to space it. I haven't finished trawling thru the shed yet so i may find them