JTD 16v Injectors removal - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools
(Post Link) post #1 of 2 Old 22-10-12 Thread Starter
Status: -
Join Date: Dec 2010
Location: United Kingdom
County: Merseyside
Posts: 4

Member car:


JTD 16v Injectors removal

I have just removed and reffitted the injectors to my jtd 16v due as 3 & 4 were blowing.
First start up was a bit awkward, but all seemed fine, no sign of leakage, erratic idle, that was there previousley had gone and engine was a lot quieter. Only problem was engine light had come on and car will now not rev over about 3500 rpm. I ensured all the injectors went back in the same place. Am i missing something, does the fuel system need bleeding? do i have to do a ecu reset? On road test it felt as if the car had gone into limp home mode.
Any thoughts, Thanks
KEYSIE is offline  
Sponsored Links
Status: [URL
AO Silver Member
Join Date: Oct 2007
Location: United Kingdom
County: Wrexham
Posts: 1,758
If you had injectors unplugged while ign on at all id think thats enough to put up a code n go into limp.
Try 3 clear restarts see if it clears, if you have no code reader to clear disconnect battery maybe to clear(if your confident thats whats thrown up code)
Injectors are self bleeding with a few turns of ignition should be enough to bleed through and prime.
sussexa is offline  

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Engines (TS, JTS, JTD & V6)

16v , injecters , injectors , jtd , jtd multijet diesel , removal

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome