Altetnator and starter wiring advise - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools
Status: - Update
Posts: n/a
Hmmm Altetnator and starter wiring advise

Hi, I took my engine out and did not label all the wires in a thorough way - too keen.
Please could someone advise on the wiring to the alternator and starter.

There is a big grey sheathed cable to the starter with a 90 degree plastic shield, ithink this bolts to the larger terminal on the starter.

There is a cable that is part of the JTS injector harness with a small round crimped terminal on the end with a rubber shield, does this go to the small terminal on the starter?

I have a large grey sheathed cable only 30 cm long with crimps on the end does this go from alternator to starter and where abouts on starter.

I have a cable with an overbraid that is loose, my notes say this is trapped by one of the starter mount bolts so I have fitted this.

This leaves me with a small cabke, with an eye on the end, no shield, doe sthis go to the alternator small terminal.

Thanks for any advice (my notes i did take a well smudged - the ink ran when it got wet)

Sponsored Links

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Engines (TS, JTS, JTD & V6)

advise , altetnator , starter , wiring

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power supplyAlfa-Alpine wiring query (cable diameters, solder method, fusing) poolfan ICE & Blue&Me 14 22-12-08 23:59

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome