novice oil burner.
Join Date: Dec 2008
Location: United Kingdom
FiatECUscan, service light, cylinder correction
Just purchased a full version and an ELM327 lead from Ebay and so far I am very impressed. The main reason for the purchase was to reset the service indicator on my 147 1.6TS and 159 1.9JTDm
After resetting the 159 I decided to have a little play and have noticed that my cylinder correction values are all over the place.
Cylinder 1 average = -0.231
Cylinder 2 average = +1.450
Cylinder 3 average = -0.918
Cylinder 4 average = -0.289
From what I've found a reading between -0.9 and +0.9 is acceptable, so I am now looking at finding the cause of cylinder 2 and 3's readings. I'll take some readings tomorrow, but will hopefully get to play with the software in full one day....wife permitting.
Any hints and tips gratefully received.