V6 Intake Runner Hoses for 3.0 V6 - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools
(Post Link) post #1 of 3 Old 27-04-10 Thread Starter
Status: The doorhandle on my Toyota is boring
AO Member
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 798
V6 Intake Runner Hoses for 3.0 V6

Hey, i need to get a new set of intake runner hoses for my 3 litre, and stock replacements are a bit expensive. I found some aftermarket ones on ebay here:


But they are for the Alfa 75 and GTV6 because they're from the US and they don't have modern Alfas. Would they suit the later 3 litre V6? I know that the 24V 3 litre has larger intake runners compared to the 24V 2.5, but would the older engine also have the same smaller intake runners?
DAL32 is offline  
Sponsored Links
Status: Needs a thermostat
AO Silver Member
10,500RPM's Avatar
Join Date: Feb 2009
Location: Ireland
County: -
Posts: 3,263
They look like a DIY jobby. Instead of buying those measure your originals, buy the length of rubber tubing you need (450mm?), cut it and attach it all together with jubilee clips. That shouldn't cost anymore than £25
10,500RPM is offline  
Status: -
AO Member
Join Date: Jul 2008
Posts: 26
Not sure if that'll work too well, as IIRC the originals are wider at the plenum end than the other. If you just use a bit of tube, you'll probably end up with kinks, and a nasty big step in your runner.
The Black Flash is offline  

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Engines (TS, JTS, JTD & V6)

hoses , intake , runner

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome