Alfa Romeo Forum - View Single Post - Solved-Spider roof fault
You are currently unregistered, register for more features.    
View Single Post
Status: Leaning towards keeping the Spider
AO Member
Ryan_The_Spider's Avatar
Join Date: Jul 2011
Location: United Kingdom
County: Warwickshire
Posts: 627

Member car:

Giulia Veloce

Originally Posted by yerbamateo View Post
Absolutely! I've seen many Spiders, before getting mine (well, wife's actually, I'm just a handyman and ocasional driver ) and all of them had silver rollover hoops damaged, or scratched, or glued...
You can quite easily remove the gas springs, get one of the lower ones, and try to squeeze it in your hands. 200N is quite a lot, and squeezing a new one is very, very hard. Or rather, imposible with bare hands.
To move swiftly heavy rear window across the hoops is a carefully orchestrated effort of all four gas springs, two coil springs that keep upper corners and elastic strap that runs along the window. All those elements loose strength over time, and with minimal distance to the hoop it makes the window to sag and fall in the groove on the hoop.

And the second issue, popping corner - when you close the hood, the hydraulic cylinder on the fifth arc exerts sufficient force to close, but once it's over, hydraulic pressure drops, and if the gas spring doesn't hold, rubber buffer on the over-centre pops the strut back, sometimes alone, sometimes due to vibrations during ride. In some cases, depending on where the Hall sensor is on the hydraulic cylinder, it may cause "Hood not closed" message.

Moving the Hall sensors around is what most Alfa dealers charge as "roof adjustment". Actually, the roof has very few adjustable parts - mostly locks, and main anchor points, which are rarely out of adjustment.
It's a reliable German construction, by Webasto, used also in 3-series beemer and in slightly different version on other cars.

Where are these hall sensors?

I am getting an error message where my roof doesn't do anything. I took it a dealership and they confirmed it was microswitch failure but they couldn't confirm anything until they do further investigation, smells fishy to me lol.

If you have any information where all the microswitches are in the roof and any schematics it'll be appreciated.
Ryan_The_Spider is offline  
For the best viewing experience please update your browser to Google Chrome