1.9 JTD clutch

Hello,

We're facing a rather annoying problem with my dad's Fiat Multipla, model 2005. It is using the 1.9 JTD (115Bhp, 205Nm torque) engine.

After chiptuning ( 140Bhp, 270Nm torque ), the clutch is slipping ( weak clutch spring ) and juddering ( weak springs in the 2 mass flywheel ). Is it possible to change the clutch and flywheel by the ones used in alfas ( 147 / 156 ), or are there any other solutions?
( downtuning is not quite an option )

I've heard the clutches are interchangable, but I've only read about this once and I need a bit more certainty

Thanks in advance!!

check on the ePer if they are they share the same part number...

hi moose , any luck with uprating the clutches and flywheel for 1.9 Jtd ?
planning to get mine upgraded too

My dad has been to Sachs ( builder of the clutch in the first place ) to have the Cluth strengthened.
I'll ask him for the details about what has been done exactly because I don't know it by heart

That will be nice to know....