Alfa Romeo Forum banner

166 callipers fitted to the 20v 156

652 views 1 reply 0 participants last post by  mr-mac 
G
#1 ·
Well that's the 156 20v kitted out with 166 four pot Brembos.

Only had 25min drive and by end they were considerably better than old brakes and they still have loads of bedding in to do so can only assume they are going to be crazy good...

305 brembo gta discs, 166 callipers, allied Nippon carbon Kevlar sports pads and 15mm h&r hubcentric spacers. Braided stainless hoses still to go on and spacers for rear still to go on....

Next weekend upper and lower arms, tre's, rod end and uprated drop links....

;)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top