Alfa Romeo Forum banner

156 Exhaust Diameter?

Tags
diameter
5K views 15 replies 5 participants last post by  gotcha 
#1 ·
Have put in a supersprint backbox, but need to use an extension piece as it is scoring the rear anti roll bar.

Anyone know the collar diameter size that will be needed to extend it about 5 inches ideally?
 
#6 ·
yeah but it should have gone straight on, no issues, so that points to the wrong one.

you may have ordered the right part, but they seem to have sent the wrong one:(
 
#8 ·
or that, but it should have gone straight on with no problems, supersprint dont usually make build errors;)
 
#16 ·
The problem is you bought it second hand and the previous owner didnt give you the extension. I bought supersprint brand new and it was suplied with 2 extensions about 15 cm long with different diameters. One is to fit the backbox on original center part and second one is to fit the backbox on wider diameter supersprint center part.

You need somebody to make the extension for you.

http://i229.photobucket.com/albums/ee114/gotcha147/Various cars/014.jpg
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top