Alfa Romeo Forum banner

Alfa 156 selespeed leaking

Tags
leaking
837 views 5 replies 3 participants last post by  belavia 
#1 ·
Found a leak of selespeed oil this morning, it appears to come from the breather. It has only leaked while the car was cold. Checked level and it appears fine. Does it overflow when hot or something?
checked with Fiatecuscan everything looks ok, pressure drops very slowly from 55-44 bar then pump comes on (every 7mins or so), gears changing normal.

just purchased this car and i got issues already, 123k kms on the clock. Thanks guys in advance for answers.
 
#2 ·
If you have recently topped it up, it just means you added too much and it blew the excess out of the breather as the system relaxed over night.
 
#4 ·
yeah i noticed i had overfilled, sorry for that guys. thanks for your help.

But i have a new problem now, i done calibration on fiatecuscan, came out test 00 (completed). but now it revs when downshifting from 3rd to 2nd. clutch rod length is 29.8mm is that wrong? should it be 28 something? jumps 500rpm up from normal.

Any help?:cry:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top