Alfa Romeo Forum banner

'94 164

741 views 1 reply 2 participants last post by  In_The_Pass 
#1 ·
Hello everyone, This car was towed to my shop with the trans inoperative. I pulled the unit, a ZF4HP18Q, and rebuilt it, (the pump drive gear had split). After reinstalling I find that the unit is in failsafe. Moreover, there is no voltage at the solenoid connector on the trans. I am assuming that there is a fuse somewhere protecting this circuit, but it's not in the fuse block and I can't find its location using conventional sources. Can any of you supply that info? I'd like to avoid disassembling the car if possible. My sincere thanks for your help Clearman
 
#2 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top