Re: Diesel in my wiring loom!! 1.9 JTD mjet
Thanks for welcome everyone. I have decided (after discussing it with a senior Honda engineer) that rather than spend shed loads of money straight away to give it a go myself (with lots of his help!!!).
We are going to take off the current loom, strip it down, clean it, dry it and put it back together. Re-attach and see which part gets wet first, then replace that sensor / connector. Sounds like a plan!
Gonna fit a new Air Con high pressure pipe at the same time whilst we are in there as apparently a crack in mine caused by the rubbing of a clip!
I'll let you guys know how i get on.
In the meantime i came across a breakers that only does Alfa's called Mitchell Vehicle Dismantling Ltd. I have not used them yet so cannot personally recommend. Not sure if they have been mentioned in forums before.