Altetnator and starter wiring advise
Hi, I took my engine out and did not label all the wires in a thorough way - too keen.
Please could someone advise on the wiring to the alternator and starter.
There is a big grey sheathed cable to the starter with a 90 degree plastic shield, ithink this bolts to the larger terminal on the starter.
There is a cable that is part of the JTS injector harness with a small round crimped terminal on the end with a rubber shield, does this go to the small terminal on the starter?
I have a large grey sheathed cable only 30 cm long with crimps on the end does this go from alternator to starter and where abouts on starter.
I have a cable with an overbraid that is loose, my notes say this is trapped by one of the starter mount bolts so I have fitted this.
This leaves me with a small cabke, with an eye on the end, no shield, doe sthis go to the alternator small terminal.
Thanks for any advice (my notes i did take a well smudged - the ink ran when it got wet)