Rear arm bushes
This is just my opinion but I think the GTV would benefit from having the proper ball joints on the two lower arms rather than polybushes which have a lot of stiction and limited angular deflection.
I've identified the correct outer bushes for the rear arms on the GTV / Spider and I can get decent quality ones ( TRW / Lemforder) at a good price (working as an engineering procurement specialist has it's benefits...)
I want to do the same for the inner (subframe end) bushes but I don't know the OE dimensions. Does anyone know the size or have a spare arm they can measure to save me having to dismantle mine?
I'd need to know the overall length, the OD of the case and ideally the length of the case. The I/D will be 12mm or 12.1mm