V6 Clutch issue
Hi Guys. Any help would be appreciated.
I had a problem a month ago where the clutch pedal was getting lower each time I drove the car, I parked it up after nursing it home in the garage.
Went back few days later, pedal on the floor ! I replaced the slave cylinder, which was a mission as it would not come out the bracket!
Anyway went to bleed it, would not bleed, so decided that the master cylinder must be naff, so I rebuilt the master in situ, as at the moment the car is stuck in the garage.
Ive now replaced both cylinders and am unable to bleed the system, Ive tried one man bleed system which pulls the fluid through, I've also filled the slave with fluid, I've tried the one way valve bleeder, non have worked and the most I have achieved is a couple of inches of movement with slight resistance!
Really lost now, Ive been thinking it maybe the feed pipe to the master is block?