Re: the motor control hood
thank , I will go to garage and try this way. ......... AH , good news, Roof can close. First I follow your suggestion , spray some WD-40 on the mechanicl linkage ,that I can see. Then I try to test it. It's nothing happend. Becsause I already read some suggestion from this forum, then I try again what all of yours suggest, I Use A Hammer, to tap the mechanicl components around the motor. ( I afriad will damage the motor) Then I try again to close the roof. It's failure. At the end, I keep the key in MAR position, And Tap the wall behind the motor in hard and stronge force. This time because this action make something shake ( Seismic wave ) near the motor and hear something, and then cover panel was "click" open. Bingo. But the panel open very very slow,And stop. Then I just pull it up by hand and spray some WD-40 on those Arm and joint. And carry on to finished the processed to close the roof. Ha..... Happy Happy!