Join Date: Nov 2006
Location: Near Airdrie (Scotland)
Re: GTV passenger window
Adjusting the glass so it will stop at the correct position is quite easy but takes a bit of time and fiddling about to get it just right. As the above posted link shows there are two two adjusting screws at the bottom of the door, locked in place with a nut. These are reachable with ought removing the full door panel.
The tilt the glass away/towards the top of the sealing rubber. You can adjust then independently to ensure the glass mates all round the seal.
The other important adjustment is the glass stops which can only be adjusted by fully removing the door panel. There is one on the lock and Hindge side of the door, right at the top. Each stop is locked by two screws.
Before all this I would check your door is closing properly and sitting flush with the rest of the body work!
Mines a shoggy....whats YOURS?
My dog says my ALFAs "RUFF".. what does he know , he's a dog!