Re: Removing glovebox - GTV
I'm assuming LHD will be roughly the same as RHD, and if so it's just a matter of removing all the screws/bolts. Most are in the 'roof' of the glovebox, so you'll have to open it and work inside - I think they're all hex head bolts as well, so you'll need a set of hex drivers or allen keys. Just remember which ones came from where, as they're not all the same size. There are also three larger bolts on the outside of the glovebox, near the rear hinge at the bottom. Oh, nearly forgot - you'll have to remove & disconnect the light/boot opener button unit as well, as that runs through the side of the glovebox. Can't remember the details, but that was quite straightforward - it may just pull out.