the story so far -
pick the car up and neither of the door windows were working, tried all the usual stuff and then finally bit the bullet and stripped both of the door cards off. Found the following -
Drivers door - No motor!!! So ordered a replacement and fitted it at the weekend but the motor burnt out before I
realised that there is a permanent12v feed via the white/green wire which goes to the motor. it is live even with the ignition off! So now I waiting from another replacement motor to turn up before I can try again.
My feeling is that is one of the following causing the problem -
the window ecu has a fault
or the window ecu is getting an incorrect signal from the door lock mechanism
or somewhere in the wiring loom there is a fault
Passenger door - no power to the motor at all. Have swapped the switch but this had no effect but have not got any further than that
any ideas anyone?