Re: GTV gear stick gaiter?
Aluminuim would be best, its easier to work with so you could do it yourself and you could then spray with a clear lacquer or silver, then lacquer to get a finish that matches. You'll need to make a template first, possibly with a piece of ply to get the spacings right. When you've tested this (making sure you've allowed enough for engine and gearbox movement in use), you can lay this over the aluminium as a former. Drill holes at the ends and use a jigsaw to cut the slots. A bit of filing and finish off with fine grade wet and dry. Some nice stainless dome headed allen bolts would look go too.
GTV and Racing Driver