Re: Boot lock fallen off!!
The lock assembly is held in by a collar.
Hopefully you will find it in the boot (or in the panel behind the boot trim).
It's a very simple job to sort it. Remove the trim, or at least as many clips as you need to, to get to the back of the lock. The rectangular buttons holding the trim on are a bit of a pig to remove. You need to get a wide, flat bladed screwdriver under one of the long sides and push towards the centre. This releases the clip and it should come out fairly easily.
The lock retaining collar has a flat section with a U cutout. This goes round the badge pillar, so you know you have it the right way round.
Push the badge/lock mechanism firmly into the boot aperture and place the collar over the back of the lock. Rotate the collar anticlockwise until the badge pillar is inside the U of the collar. Job done.
'96 GTV 2.0L 16v T.S. in metallic black