Re: Bonnet Release Mechanism :- Help!
I had a similar problem when I first got mine. The cable has stretched a little and the levers may be a bit sticky from years of grime, in my case simply wasn't fully releasing every time. It should be easy to fix in 5 minutes. There are two places to adjust the cable one on each side. Look for the little actuating lever and you should see a little knurled adjuster with a locking nut. A little fiddly to get into but nothing needs to be removed. Give eveything a good clean and a spray with WD40 followed by a dab of grease to finish off. When you've done, just make sure that both sides are still locking off (i.e. you havn't adjusted it too much.
GTV and Racing Driver