AO Gold Member
Join Date: Jun 2009
If you just reach below both seats you will grab the wiring. Its in a bright yellow sheath and the connector block is bright yellow also, so push seat all the way forward and the wiring and connector blocks will be visible. One side of block will be seatbelt pretensioner which is bolted to the seat , the other side goes back towards airbag ecu, as mentioned above the pretensioner wiring is rubbish too. While you sit in seat reach down to where you secure seat belt when you strap yourself before driving, that cylinder below the seat belt clip is the pretensioner. You will see a black plastic domed cap, remove this cap and examine wiring there also and if necessary solder these wires also.
Last edited by EauRouge; 06-06-14 at 20:50.