Originally Posted by coolk
how easy is it to take the door panel off, i wouldn't mind having a look at it myself.
1 behind window switch, prise switch out
1 by handle
2/3 at door bottom, under cubby
2 on door cubby
2/3 at hinges end of door card
1 at door mirror, then prise this cover off upward
prise off speaker cover, remove 2 screws and disconnect and remove 4 screws of speaker
unscrew door pin
prise out and disconnect light unit bottom of door
lift door card upward carefully, dont try and remove yet, disconnect tweeter and door cable. Thats it.
When you replace make sure you have it seated correctly on all slots, it should be really flush to top window line rubber, ie no gap between rubber and door card ( look how tight it is before removal or check other door) its very easy to think its on but in fact its a few mm out and not seated correctly. This causes it to rattle when driving.