Mangia bene, vivi
AO Silver Member
Join Date: Jan 2011
Location: United Kingdom
It came up with this code:-
The code is set when the Camshaft Position Sensor signal is missing. Possible causes are:
- Connector or wire problem in the signal circuit (open or short to 12V or ground)
- Sensor installed improperly
Check the connectors, wiring and proper installation of the sensor, and the signal waveform with an oscilloscope.
PLEASE NOTE: Certain systems always set this fault code as long as the engine is not running. This is not a sign of fault!
The sensor can be of inductive or Hall effect type.
The reason for this fault is that ECU has received very low signal from the sensor. The fault is present now. Take appropriate action to fix this sensor fault. Dashboard warning light was activated for this fault.
Drive it like you stole it...