Join Date: Jan 2008
Location: Boston, Lincs
Sorry Magnus but unsure what you mean.
Is it that the motor runs but fluid doesn't come out of the Spray Bar and goes somewhere else ?
Motor not running at all ?
Motor keeps running after releasing switch ?
Assuming that Motor runs and stops correctly but no spray then check the Filter in the Tank, a blocked one of these is very common. To clean just pull the Motor out of the Tank then hook the Filter out with your fingers.
If everything seems to work as it should but no spray onto the Windscreen then check all the pipes from the Tank to the Spray Bar.
I'm guessing that this is the problem, the Motor keeps running after releasing the Switch. There is obviously a Timer on this as the Motor does run for a few seconds after initially pulling and releasing the Switch but am afraid I can't say any more about this. Another very vague possibility is the Column Switch itself but this seems unlikely to me.
Have you seen the Lincolnshire Lounge ? Don't stay off the radar, come on in and have a look !
Next Event - TBA
Look Here ! -TBA
Old radar men never die - their echoes just fade away in accordance with the inverse fourth power law.
Last edited by Nige005; 15-03-13 at 09:54.