Think the new version supports trw
Multiecuscan 1.3 is now available!
If you have an earlier version installed on your computer then you don't need to uninstall or deactivate it. Simply download the latest version and install it. It will upgrade your current installation and take the license data from it!
ELM 327 INTERFACE WARNING:
Please note that almost all ELM 327 interfaces produced in the last few months have problems accessing the CAN network. The problem can be easily fixed by simply removing one resistor from the interface. The procedure is covered in the following topic on the forum: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE).
Windows 8 note:
Multiecuscan works fine on Windows 8, but you have to install .NET Framework 3.5 (which is not installed by default). You simply have to go to Control Panel -> Add remove programs -> Add remove windows components, and install .NET Framework 3.5.
For the CANtieCAR interface you can install the same drivers as Windows 7.
multiecuscan is a vehicle diagnostic software with advanced functions. It allows you to perform various diagnostics tasks on the supported vehicles/modules. In order to use the software you need an interface. The following interfaces are currently supported by the software: KL (also known as VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
CANtieCAR is a professional multi-protocol interface with multiplexing capabilities.
multiecuscan currently has three editions - FREE, REGISTERED and MULTIPLEXED. The installation program is the same for all editions. You can download current version from here:
Download Multiecuscan 1.3
Multiecuscan 1.3 FREE
This is the limited version of the software. The program is free for personal use with some limitations (see table below and Supported Vehicles List). You can download it from the link below.
NO ONE HAS MY AUTHORIZATION TO SELL THE FREE VERSION OF THIS SOFTWARE either as a bundle with cable or standalone!
Multiecuscan 1.3 REGISTERED
This is the full version of the software. It supports a large number of modules in Fiat, Alfa and Lancia vehicles. In order to use this version you need to buy a license. The license is valid for a SINGLE computer only! You will also need an interface (please check which interfaces are compatible with your car in Supported Vehicles List). You may also need an adapter cable in order to access certain modules in your car (you can check if you need an adapter in the Supported Vehicles List).
You can buy a license from this site using PayPal or from one of the distributors. For other payment methods (like Western Union, MoneyGram or bank transfer) please contact us at firstname.lastname@example.org
Buy REGISTERED license (50 EUR)
Multiecuscan 1.3 MULTIPLEXED
This is a special bundle of the software which includes a specialized professional interface. The included interface has multiplexing capabilities, it has support for all vehicles/modules and does not need additional adapters (except the 3-pin adapter for the old vehicles). The license of the software in this bundle is locked to the interface and you may install it on any number of computers but you can use it only with the included interface.
You can buy the bundle from this site using PayPal or from one of the distributors. For other payment methods (like Western Union, MoneyGram or bank transfer) please contact us at email@example.com
Buy MULTIPLEXED package (230 EUR)
This is diagnostics software for mobile devices. It runs on Windows Mobile and Windows CE devices (including Windows GPS devices). In order to use FESmobile you need to have a license. The license is free for everyone who has a license for multiecuscan.
In most Windows CE devices you cannot install a CAB, so you have to download the RAR file and unppack it in a folder on your device, then run FESmobile.exe from there.
Download FESmobile 2.1 CAB Download FESmobile 2.1 RAR
You can get a license code for FESmobile from here:
KL (VagCom 409) interfaceYesYesNoNo
ELM 327 v1.3 (or later) interfaceYesYesNoYes, Bluetooth only
OBDKey 1.40 interfaceYesYesNoYes, Bluetooth only
OBDLink interfaceYesYesNoYes, Bluetooth only
CANtieCAR professional multi-protocol interface with multiplexing capabilitiesNoNoYesYes
Pin switchingmanual - with adapters or interface modmanual - with adapters or interface modautoauto (CANtieCAR), manual (other interfaces)
License typeN/Asingle computer,
many interfacesmany computers,
single interfacesingle device,
Read ECU identificationYesYesYesYes
Clear fault codesYes, for the FREE modulesYesYesYes
Read diagnostic dataYes, for the FREE modulesYesYesYes
Max number of parameters that can be selected simultaneously4UnlimitedUnlimitedUnlimited
Actuator testsYes, for the FREE modulesYesYesYes
Parameter monitoring while executing an actuator testNoYesYesNo
Reset/Programming functionsNoYesYesYes (limited set of functions)
CAN modules diagnostics (See Supported Vehicles section for a list of these modules)NoYesYesYes
Display data in graphYes, 1 graphYes, up to 4 graphsYes, up to 4 graphsYes
Max number of parameters on a graph41010N/A
Multiple graph filesNoYesYesNo
Insert tags in recorded dataNoYesYesNo
Export data to CSV fileYesYesYesNo
Auto-export data to CSV filesNoYesYesNo
Import CSV data filesNoYesYesNo
Multilanguage data (parameter names, errors, etc.).
Supported languages: English, Deutsch, Italiano, Français, Polski, Českı, Magyar, Русский, Español, Nederlands, Türkçe, Chinese, Danish, Croatian, Portuguese(BR), БългарскиNoYesYesYes
Detailed description for Parameters, Errors, etc. in EnglishYesYesYesNo
Parameter templates (a pre-selected group of parameters that can be selected with a single keypress)NoYesYesNo
Test run on any ECU ("simulation" mode) without interfaceYesYesYesYes
Auto-saved logs for each diagnostic sessionNoYesYesYes
Time limit for a sessionYes, 20 minutesNo limitNo limitNo limit
Currentntly supported control modules:
See Supported Vehicles section for a complete list of supported modules on each make/model
- Bosch EDC15
- Bosch EDC15C7
- Bosch EDC16/CF3 Multijet
- Bosch EDC16/CF4 Multijet
- Bosch EDC16/CF5 Multijet
- Marelli 6JF Multijet
- Marelli 6F3 Multijet
- Marelli 8DF/CF5 Multijet
- Bosch MSA 11
- Lucas DPNC TD100
- Lucas EPIC DCU3F
- Bosch Monomotronic MA1.7.3
- Bosch Motronic M3.7.1
- Bosch Motronic M2.10.3
- Bosch Motronic M2.10.4
- Bosch Motronic M1.5.5
- Bosch Motronic ME2.1
- Bosch Motronic ME3.1
- Bosch Motronic ME7.3.1
- Bosch Motronic ME7.3H4
- Bosch Motronic ME7.3H4M
- Bosch Motronic MED7.11
- Bosch Motronic Me7.6.3/CF4
- Bosch Motronic Me7.9.10/CF5
- Bosch Motronic MeD7.6.1/CF4
- Bosch Motronic MeD17.3.1 CF5
- Hitachi MPI
- Magneti Marelli IAW 5NF
- Magneti Marelli IAW 4AF/4EF/59F/5AF
- Magneti Marelli IAW 49F
- Magneti Marelli IAW 5SF3/CF4
- Magneti Marelli IAW 5SF8/CF5
- Magneti Marelli IAW 5SF9/CF5
- Marelli SELESPEED (old Alfa 156 SELESPEED)
- Marelli SELESPEED CFC208F
- Marelli SELESPEED CFC209F
- Marelli SELESPEED CFC218F
- Marelli SELESPEED CFC228F
- Marelli SELESPEED CFC300
- Marelli SELESPEED CFC328
- AISIN AF40-6
- AISIN YLII 5
- AISIN YLII 5
- ZF 4HP20
- Bosch ABS 5.7 VDC/ASR/TC
- Bosch ABS 8 VDC/ASR
- Lucas EBC 430 ABS
- Bosch ABS Teves MK20/MK70
- Bosch ABS 5.3 TC/ASR
- TRW Lucas ABS/ESP
Electric Power Steering
- TRW Electric Power Steering
- Delphi Electric Power Steering
- SAGEM Power Steering
- ALLIED MY97 Airbags
- BREED MY97 Airbags
- TRW MY97 Airbags
- AUTOLIV MY99 Airbags
- SIEMENS MY99 Airbags
- TRW MY99 Airbags
- TRW MY03 Airbags
- TRW MY05 Airbags
- AUTOLIV MY06 Airbags
- SIEMENS MY06 Airbags
- AUTOLIV MY07 Airbags
- CONTINENTAL Airbags
- TRW Airbags
- Service Interval Reset
- CAN Setup / PROXI Alignment Procedure
- Remote control programming
- Delphi/Marelli Body Computer
- Marelli MF Body Computer
- Marelli Body Computer
- Delphi Body Computer
- Siemens Body Computer
- Visteon Instrument Panel
- Marelli Instrument Panel
- Nippon Instrument Panel
- Siemens Instrument Panel
- Siemens VDO Instrument Panel
- Mannesman VDO Instrument Panel
- Valeo parking control
- Bosch parking control
- BITRON Driver door, Passenger door and Boot
- G.E. PROCOND Driver door, Passenger door and Boot
- TRW Driver door and Boot
- Bosch XENON headlights
- Valeo XENON headlights
- Litronic XENON headlights
- Delphi Climate Control
- Harrison Climate Control
- A computer that runs Windows XP, Windows Vista, Windows 7 (32/64), Windows 8 (you need to install .NET Framework 3.5)
- Microsoft .NET Framework Version 2.0 SP1 (or a newer version). Free, available from www.microsoft.com
- K-line/VagCom 409, ELM 327 v1.3+, OBDLink, ELMScan, OBDKey 1.40 or CANtieCAR interface
- 1.5GHz CPU and better recommended
For further details and question please visit our forum.
- A Windows Mobile (versions 5, 6.0, 6.1, 6.5) or Windows CE device with Bluetooth support. Could be a cell phone, PDA or GPS device.
- Bluetooth ELM 327 v1.3+, OBDLink, ELMScan, OBDKey 1.40 or CANtieCAR interface
For further details and question please visit our forum.
You can download current version of Multiecuscan from here: Download multiecuscan 1.3
The file is an installer. It will install the program and all required files on your computer.
You can download current version of FESmobile from here: Download FESmobile 2.1 CAB installer
The file is a CAB installer. It will install the program and all required files on your Windows Mobile/Windows CE device.
You have to uninstall the previous version first!
It is also available as a RAR archive: Download FESmobile 2.1 RAR package
This is suitable for Windows CE devices!
You have to unpack this RAR in a folder on your Windows CE device and then run FESmobile.exe from that folder.
You can purchase a license for Multiecuscan REGISTERED version HERE.
You can purchase Multiecuscan MULTIPLEXED package HERE.
What to expect in next releases:
- Support for more control modules