Planning the next
AO Silver Member
Join Date: May 2007
Location: United Kingdom
As above, you may be OK.
However, if you want to be absolutely sure before you fit the wheels/tyres properly, remove one wheel from the car. Measure the bolt as David C indicates to be sure the bolt is correct. Then, push the bolt through the wheel removed from the car and measure how much sticks through the other side. Then take the bolt and put it through your new wheel and spacer and measure again.
If there is a significant difference, you can calculate the length of the bolts you need from the two measurements.
Last edited by pkr; 12-09-12 at 08:13.