AO Gold Member
Join Date: Jun 2009
Two screws that are on the front edge of the doors in the shut area, the small plastic piece that fits over the wing mirror housing (1 Screw) remove the windows switches, get a blade screwdriver and lever it out disconnect cable from switch. Behind this is the largest bolt that secures the handle and door card to door frame. Remove the screw in the door latch assembly, remove speaker cover and undo screws that attach the panel to the door, finally remove the two scres that hold the cubby hole cover to the door card and door, once these are removed undo the other 2 screws that hold card to door.
Now, lift the door card up and off the door, just free it at first so that you can access the bowden cable behind door card, flick the plastic clip away from the cabble and remove cable, disconnect speaker, tweeter and door card should now be free.
As for the insert, turn the door cover over and it should be easily visible how the insert is removed. Its not a difficult job at all just remember which screws go where as they are all quite different.