Would like to fit window auto drop to me baby ...what parts are needed and how easy is it,
I'll be fully documenting it when I'm done and I'll include part numbers etc - that should be in a week or so.
In my case, I'm making the parts to convert my phase 1 window regulators to autodrop rather than buying the regulators. Autodrop regulators are fairly scarce and relatively expensive.
However, if unlike me you're not a cheapskate, the components that can be bought are :
1. Integrated Services Unit ( window, locking etc controller behind the glove box ).
2. Driver's and passenger's window regulators
In addition, you'll need :
5. Connector housings
6. A lot of time and patience adjusting the windows again afterwards!
The job is relatively easy on phase 2 and late
phase 1. That's cars built after April 1997. For cars built before May 1997 the job is impractical using the factory controller and realistically another method would need to be found.
More detail to follow in the full write up.