I purchased this https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1
The above devise is very cheap, but actually does not look that cheap and tacky so I would recommend if you are aiming to do the same thing
But wiring diagram supplied is a complete waste of time, however after a bit of research I have managed to get the cetral locking site of things working.
Incase anyone wants to add one onto a phase one (Mine Spider) this is the correct wiring from devise loom
Blue - Not Connected
Green Opening (Blue wire going into drivers door) RHD
Pink - Negative Ground
Blue/Wht Not Connected
Green/Wht Closing (White which is next the the blue at drivers door)
Pink/Wht - Negative Ground
Red - Perminant Live ( Plenty of sources around fuse box)
Will add more once I have confirmed what is what
Pretty much thanks to original posters in this thread for locating wires in the car.
(I did have the wires by the interior light, but the blue and white were going nowhere)
My question is for the blinking lights could I just tap into the hazard light switch? if so which wire??
Also could someone confirm the boot popping connection
There are a few other wires on that particular devise, one needs going to the ignition ACC position and one to the brake switch, this basicly will lock the car when it is running as soon as the brake peddle is pressed.
The others wind up the windows from the keyfob, of which I am not sure will even work on my spider so I am not even going to attempt.
If someone could make my life easier regarding the blinking lights, it would be much apreciated