Resurecting this thread. My GF bought me one of these for my birthday. I had a bash at fitting it at the weekend but failed miserably.
The rods on the plain pipe appear to be far too long so with it hung on the hangers and the joint made the curve that the backbox attaches to is on a coule of inches off the ground, it is well below the subframe! Then when i attach the backbox the backbox itself is 5 inches too low and 1 inch too far back from the hanger. It is not even close to fitting!
Does anyone have this exhaust and did you have any problems fitting? From what i can tell i am going to have to chop an inch off the plain pipe and then chop a couple of inches off the mounting rod and rebend it.
Alfa GT 3.2 V6 - Daily Driver.
Alfa 145 QV ph1 in green (Death by rust project) For Sale.
Alfa GTV TS ph2 in blue